Question

Notify Me Bookmark

For the PMOS transistor shown VTP = -0.8 V and kP = 0.2 mA/V2. The values of VS and VSD are: a. VS = -0.78 V and VSD = -2.78 V b. VS = 1.341 V and VSD = 1.341 V c. VS = 2.381 V and VSD = 4.881 V d. VS = 2.871 V and VSD = 3.871 V

For the PMOS transistor shown VTP = -0.8 V and kP = 0.2 mA/V2. The values of VS and VSD are: a. VS = -0.78 V and VSD = -2.78 V b. VS = 1.341 V and VSD = 1.341 V c. VS = 2.381 V and VSD = 4.881 V d. VS = 2.871 V and VSD = 3.871 V

Image text
For the PMOS transistor shown VTP = -0.8 V and kP = 0.2 mA/V2. The values of VS and VSD are: a. VS = -0.78 V and VSD = -2.78 V b. VS = 1.341 V and VSD = 1.341 V c. VS = 2.381 V and VSD = 4.881 V d. VS = 2.871 V and VSD = 3.871 V

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

In this amplifier circuit, the high and low DC voltage sources are: VDD = 5 V and VSS = −5 V respectively. Consider that all three external capacitors have high values. The PMOS transistor has a threshold voltage equal to Vt = −1 V and kp = kp′(W/L) = 0.4 mA/V2, and the NMOS transistor has a threshold voltage Vt = 1 V and a kn = kn′(W/L) = 2 mA/V2. It was shown in HW#7 that the DC drain voltage of the PMOS transistor is −0.2 V and the DC source of the NMOS transistor is −2 V. a) Perform the small signal analysis of this circuit and determine the voltage gain: AV = Vo/Vi b) Determine the input and output resistance of this amplifier Rin and Rout . c) Discuss what is the purpose of the part of the circuit between CC2 and CC3 which includes the NMOS transistor in this amplifier design. d) Determine the parameters of a simple voltage amplifier model (discussed in chapter 1) which will represent this amplifier. Note that the parameters of the simple voltage amplifier excludes any series resistance of the external source ( Vi ) (in this case it is zero anyway) and the load resistance (in this case RL = 2 kΩ ). e) Using the simple model from part (c) determine the voltage gain AV = Vo/Vi and see if it agrees with the answer of part (a). VDD
Solution
0 0

In Figure 5, RI = 200 Ω, RS = 70 kΩ, RL = 200 kΩ, RD = 50 kΩ and VDD = VSS = 15 V. Kp = 200 μA/V2, VTP = −1 V and λ = 0.02 V−1. Calculate the Q-point of this amplifier VSD = V, ID = mA. Figure 5. VSD = V ID = mA
Solution
0 0

For the PMOS differential amplifier shown in Fig. P8.2 let Vtp=-0.8V and k'pW/L=4mA/V^2. Neglect channel-length modulation.
(a) For VG1 = VG2 = 0V, find Vov and VGS for each of Q1 and Q2. Also find Vs, VD1, and VD2.
(b) If the current source requires a minimum voltage of 0.5 V, find the input common-mode range.

For the PMOS differential amplifier shown in Fig. P8.2 let Vtp = -0.8 V and kp'W/L = 4 mA/V^2. Neglect channel-length modulation. (a) For VG1 = VG2 = 0V, find Vov and VGS for each of Q1 and Q2. Also find Vs, VD1, and VD2. (b) If the current source requires a minimum voltage of 0.5 V, find the input common-mode range.

Solution
1 0