Question

Notify Me Bookmark

Given a MOSFET with the following characteristics: Vth = 0.8 Volts VA = 100 Volts μCoxW/L = 1.0 mA/V2 (a) Select RD, R1 and R2 to result in VDQ = 16 Volts, ID = 2 mA and IR1 = 1 mA. (b) Determine the small-signal gain

Given a MOSFET with the following characteristics: Vth = 0.8 Volts VA = 100 Volts μCoxW/L = 1.0 mA/V2 (a) Select RD, R1 and R2 to result in VDQ = 16 Volts, ID = 2 mA and IR1 = 1 mA. (b) Determine the small-signal gain

Image text
Given a MOSFET with the following characteristics: Vth = 0.8 Volts VA = 100 Volts μCoxW/L = 1.0 mA/V2 (a) Select RD, R1 and R2 to result in VDQ = 16 Volts, ID = 2 mA and IR1 = 1 mA. (b) Determine the small-signal gain

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

In the amplifier circuit shown in Fig. Q5, the BJT Q1 has β = 100 and VA = 100 V. The MOSFETs, M1 and M2, are identical with VTH = −1.0 V, Kp = 2 mA/V2 and they do not experience Channel Length Modulation effect. The temperature is 300 K. Fig. Q5 The BJT Q1 operates in the forward active mode and its collector current, IC, Q1 = 1.6 mA. Ignore the Early effect of the BJT when performing DC analysis. (a) Determine the drain current of the MOSFET M2, ID, M2. (6 marks) (b) Determine R3 that will give rise to the desired IC, Q1. (4 marks) (c) Determine the values of the 2-port network equivalent parameters of the amplifier: Gm (or Av), Rin and Rout. (8 marks) (d) Determine the gain (vout/vs) of the amplifier. (2 marks)
Solution
0 0

For the following two problems, the supply voltage VDD is 3.3 V, and the MOSFET transistors have VTH = 0.5 V, μnCox = 200 μA/V2, and λ = 0. (a) Design this common-source (CS) amplifier with the following constraints. That is, determine the W/L ratio for the MOSFET transistor (M1) and the resistance values for RD, RE, and R2. −RS = 200 Ω and R1 = 100 kΩThe amplifier must provide a small-signal gain ( = vout/vin) of 10. The maximum power budget is 5 mW. At DC, the voltage drop across RE is 0.5 V. The gate overdrive ( = VGS−VTH) of M1 is 0.2 V. (b) Now design this source-follower (SF) stage driving an 8 Ω speaker. RG is 100 kΩ. Determine the W/L ratio of the transistor M2 and the resistance value RS that bias the transistor at gm = 0.15 Ω−1 and ID = 30 mA. Also, calculate the small-signal gain (AVv = vout /vin ) of this SF stage driving the 8 Ω speaker.

Solution
0 0

Q3. Figure Q3 shows a single-stage amplifier with current mirror biasing. For the two p channel MOSFETs, VTHP1 = VTHP2 = −1 V, λP1 = λP2 = 0, Kp,M1 = Kp,M2 = 2 mAV−2. For the pnp BJT, β = 100, VA = 100 V. Fig. Q3 (a) Design RREF such that ID,M1 = 1 mA. [ Ans: RREF = 8.29 kΩ] (b) Calculate the small signal parameters of Q1, i. e. , gm,Q1, rπ,Q1 and ro,Q1. (c) Identify the configuration of the single-stage amplifier. (d) Determine the parameters, Gm, Rin and Rout of the two-port network of the amplifier. (e) Determine the gain vo/vs of the amplifier using the 2-port network parameters derived in part (d). [Ans: vo/vs ≈ −180]

Solution
0 0