Question

Notify Me Bookmark

Given a symmetrical inverter on the left. Size the transistors in the circuit to the right for worst-case pull-up and pull-down that match the current drive of the inverter

Given a symmetrical inverter on the left. Size the transistors in the circuit to the right for worst-case pull-up and pull-down that match the current drive of the inverter

Image text
Given a symmetrical inverter on the left. Size the transistors in the circuit to the right for worst-case pull-up and pull-down that match the current drive of the inverter

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

Given a symmetrical inverter on the left. The transistors are sized in the circuit to the right for worst-case pull-up and pull-down that match the current drive of the inverter. In the PDN, find the Width of NMOS with gate connected to D? So the N2 in the below figure will be equal to

Solution
0 0

For a CMOS inverter fabricated in a 65nm process with VDD = 1.0 V, Vtn = Vtp = 0.35 V, K′n = K′p = 500 A/V2, and having (W/L)n and (W/L)p = 4. Find TPHL, TPLH, and TP, when the equivalent load capacitance C = 4 fF. Use the method of average currents. Now, create a NAND gate with worst-case pull-up and pull-down that match the current drive of the inverter. Calculate the worst and best case delays with equivalent load capacitance C = 4 fF. Use the method of average currents.
Solution
0 0

Problem 1: Consider the logic circuit below to the left: (a) What is the logic function implemented by the design below? (b) Size NMOS and PMOS devices in the circuit below so that the worst-case pull-up and pull-down strength of the circuit is exactly as much as in the inverter shown to the right. Assume that all the transistors in the circuit above and in the inverter have a minimum channel length (LMIN). In the inverter, the width of NMOS is WMIN and PMOS is 2×WMN. (c) For the logic design, identify the transition for the worst case 'high to low' and 'low to high' delay considering that only one of the input (among A, B, C) switches. Compute RC delay for these transitions. Assume that the resistance of a minimum width width (WMIN), the junction capacitance is C at each source and drain ends. Ignore any external load capacitance for the circuit.

Solution
0 0