Question

Notify Me Bookmark

Given that the NMOS FET in the following Circuit has the following characteristics: Vgs( Threshold ) = 1.7 V VA = -3800 V ro = 3.7 MΩ What value of Rx is required to get a nominal gain of -10? Find the gate voltage.

Given that the NMOS FET in the following Circuit has the following characteristics: Vgs( Threshold ) = 1.7 V VA = -3800 V ro = 3.7 MΩ What value of Rx is required to get a nominal gain of -10? Find the gate voltage.

Image text
Given that the NMOS FET in the following Circuit has the following characteristics: Vgs( Threshold ) = 1.7 V VA = -3800 V ro = 3.7 MΩ What value of Rx is required to get a nominal gain of -10? Find the gate voltage.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

A differential amplifier with a single-ended output is shown below along with the MOSFET parameters. The amplifier is to be designed for a differential mode gain of 10 and a CMRR of 200 . The current source I must have a voltage drop VCS ≥ 1 volt. The voltage V0 = 0 when the MOSFET gates are at ground potential (Va = Vb = 0). Assume the current source I must have a voltage drop of at least Vcs, min = 1 V. MOSFET Parameters kn = 2×10−4 A/V2 Vt = 1 V;VA = 30 V a. Show that the single-ended differential gain can be expressed as Ad = gmro||RD/2 = Ad = kn I VDD(1 + VDD/VA). Hint: Express gm, RD, and ro as functions of the drain current 1 /2. b. Use the result of step #1 to find the required bias current I. c. What should be the value of RD ? d Find the required value of Rss. e. What is the maximum differential input voltage Vid for linear operation. f. What is the common mode input voltage range?
Solution
0 0

Figure 1 shows a single stage common source MOSFET amplifier circuit. We wish to design the circuit to meet the following design specifications: Load Resistance: RL = 100 KΩ Input Resistance: Ri > 200 KΩ Mid-band Gain: Gv = Vo/Vi = −50 ± 20% Supply Voltage: +15 Volts Circuit Capacitors: CG = 10μF; CS = 47μF; CD = 10μF Figure 1. Common Source MOSFET Amplifier Pre-lab: (a) Design the amplifier to meet the specifications above by choosing values for resistors R1, R2, RD and RS. Begin your design by choosing an appropriate value for the bias current ID. If ID ≈ 0.3 mA, assume VT ≈ 1.7 V, Kn ≈ 0.02 A/V2 and VA = 100 V(λ = 0.01 V−1). Find the small signal approximation of the input resistance Rin where Rin = R1∥R2 Find the small signal approximation of the output resistance Ro, where Ro is given as Ro = RD∥RL∥ro. The small signal mid-band gain of the amplifier is given by Gv = −gmRo where gm = 2knID = kn(VGS−VT) Once you choose ID the DC biasing of the transistor can be found using simple rules of thumb. The voltage VG should be approximately equal to VDD/3 > VT. For maximum symmetry, VD should be biased at the midpoint between VD(Max) and VD(Min). Clearly, the maximum VD is VDD and the minimum VD > VG−Vt. For example, if Vt = 1.7 V and VG = 1/3VDD = 5 V, then VD ≈ 9 V for maximum symmetry.

Figure 1 shows a single stage common source MOSFET amplifier circuit. We wish to design the circuit to meet the following design specifications: Load Resistance: RL = 100 KΩ Input Resistance: Ri > 200 KΩ Mid-band Gain: Gv = Vo/Vi = −50 ± 20% Supply Voltage: +15 Volts Circuit Capacitors: CG = 10μF; CS = 47μF; CD = 10μF Figure 1. Common Source MOSFET Amplifier Pre-lab: (a) Design the amplifier to meet the specifications above by choosing values for resistors R1, R2, RD and RS. Begin your design by choosing an appropriate value for the bias current ID. If ID ≈ 0.3 mA, assume VT ≈ 1.7 V, Kn ≈ 0.02 A/V2 and VA = 100 V(λ = 0.01 V−1). Find the small signal approximation of the input resistance Rin where Rin = R1∥R2 Find the small signal approximation of the output resistance Ro, where Ro is given as Ro = RD∥RL∥ro. The small signal mid-band gain of the amplifier is given by Gv = −gmRo where gm = 2knID = kn(VGS−VT) Once you choose ID the DC biasing of the transistor can be found using simple rules of thumb. The voltage VG should be approximately equal to VDD/3 > VT. For maximum symmetry, VD should be biased at the midpoint between VD(Max) and VD(Min). Clearly, the maximum VD is VDD and the minimum VD > VG−Vt. For example, if Vt = 1.7 V and VG = 1/3VDD = 5 V, then VD ≈ 9 V for maximum symmetry.
Solution
1 0

(a) State the advantages of the CMOS inverter over the NMOS inverter. (b) Realize the following logic function using NMOS & CMOs logic gates. F = (A+B).(C+D).E (c) For a particular logic family for which the supply voltage is V+, VOL = 0.18 V+. VOH = 0.87 V+, VIL = 0.35 V+, and VIH = 0.55 V+. (i) What are the noise margins (NML and NMH)? (ii) What is the width of transition region? (iii) For a maximum noise margin of 2 V, what value of V + is required (d) If VA = 4 V, find Vout for the NMOS inverter shown in figure 5. (Given VT = 1 V and μnCox = 40 μA/V2) (e) If VA = VB = VC = 4 V, find Vout for the 3 input NAND gate shown in Figure 6. (Given VT = 1 V and μnCox = 40 μA/V2)
Solution
0 0