Question

Notify Me Bookmark

Given the BJT circuit below with Vdd = 3v and RL = 20K and R1 = 1ohm. The BJT collector current is given by Ic = 1e−15∗exp(40∗Vbe) Write the equation for the DC sweep. Choose an operating point and solve for V1q= What is the AC gain at the operating point, Gain =

Given the BJT circuit below with Vdd = 3v and RL = 20K and R1 = 1ohm. The BJT collector current is given by Ic = 1e−15∗exp(40∗Vbe) Write the equation for the DC sweep. Choose an operating point and solve for V1q= What is the AC gain at the operating point, Gain =

Image text
Given the BJT circuit below with Vdd = 3v and RL = 20K and R1 = 1ohm. The BJT collector current is given by Ic = 1e−15∗exp(40∗Vbe) Write the equation for the DC sweep. Choose an operating point and solve for V1q= What is the AC gain at the operating point, Gain =

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)

Similar/Related Questions

In the amplifier circuit, given VCC = 10 V, R1 = 160 kΩ, R2 = 40 kΩ, RC = 2 kΩ, and RL = 2 kΩ, answer the following questions. Assume the BJT has a β = 100. (a) Calculate RE to make the BJT's operating point (Q-point) current ICQ = 2 mA. (b) Assuming ro = ∞ and CE = ∞, draw the small-signal equivalent circuit of the amplifier and calculate the amplifier's input resistance (Rin), output resistance (Rout), and voltage gain (Av). (c) Assuming ro = ∞ and CE = 0, draw the small-signal equivalent circuit of the amplifier and derive the expression for the voltage gain (Av). Then, calculate the value of Av. (d) Assuming ro = 10 kΩ and CE = 0, draw the small-signal equivalent circuit of the amplifier and derive the expressions for Rin , Rout , and Av. Then, calculate their values. (e) To operate as an amplifier, in which operating region should the BJT be biased? Explain the reason with the help of the voltage transfer characteristic.In the amplifier circuit, given VCC = 10 V, R1 = 160 kΩ, R2 = 40 kΩ, RC = 2 kΩ, and RL = 2 kΩ, answer the following questions. Assume the BJT has a β = 100. (a) Calculate RE to make the BJT's operating point (Q-point) current ICQ = 2 mA. (b) Assuming ro = ∞ and CE = ∞, draw the small-signal equivalent circuit of the amplifier and calculate the amplifier's input resistance (Rin), output resistance (Rout), and voltage gain (Av). (c) Assuming ro = ∞ and CE = 0, draw the small-signal equivalent circuit of the amplifier and derive the expression for the voltage gain (Av). Then, calculate the value of Av. (d) Assuming ro = 10 kΩ and CE = 0, draw the small-signal equivalent circuit of the amplifier and derive the expressions for Rin , Rout , and Av. Then, calculate their values. (e) To operate as an amplifier, in which operating region should the BJT be biased? Explain the reason with the help of the voltage transfer characteristic.
Solution
0 0

Find the voltages at the base and collector nodes, and the currents in all branches (IB, IE, IC) for the circuit below. Assume β = 75. What's the BJT's mode of operation? a. What if β turned out to be higher by 50%, what would be the operating point, and what would be the BJT's operating mode? Redesign the circuit from problem #2 by choosing a new value for RC that guarantees operation in the active mode for transistors with β ranging between 75 and 200. a. What range of collector voltages would the circuit exhibit over the range of β s?
Solution
0 0

For the circuit below, VCC = 20 V, VBE1 = VBE2 = 0.8 V, β = 300, VT = 25 mV, VA = ∞, R1 = 230 kΩ, R2 = 120 kΩ, RC1 = 12 kΩ, RC2 = 6 kΩ, RE1 = 500 Ω, RE2 = 3 kΩ, and RE3 = 4.5 kΩ are given. C∞s are very large coupling/bypass capacitors. a. Find the operating collector currents of T1 and T2. Neglect the base currents and assume α = 1. b. Find the value of RL1 such that the second stage output has symmetric clipping property. Assume VCEsat = 1.5 V. c. What is the voltage gain of the amplifier in dB ? d. Now, assume that the amplifier should drive a load of RL2 = 270 Ω. For this purpose, the circuit on the right is coupled to the node X in the multi-stage amplifier. Explain why this circuit has been preferred. a. Find the value of IDC given that kn,T3 = 30 mA/V2 and λ = 0, such that the voltage gain of the newly-added stage is AV, T3 = 0.9. Assume that T3 operates in the saturation region.
Solution
0 0