Question

Notify Me Bookmark

If a 7-kΩ load is connected to the terminals of the network in the figure below, VAB = 4.28 V. If a 18-kΩ load is connected to the terminals, VAB = 6.83 V. Find VAB if a 29-kΩ load is connected to the terminals. Vth = V Rth = kΩ VAB across 29 kΩ load = V

If a 7-kΩ load is connected to the terminals of the network in the figure below, VAB = 4.28 V. If a 18-kΩ load is connected to the terminals, VAB = 6.83 V. Find VAB if a 29-kΩ load is connected to the terminals. Vth = V Rth = kΩ VAB across 29 kΩ load = V

Image text
If a 7-kΩ load is connected to the terminals of the network in the figure below, VAB = 4.28 V. If a 18-kΩ load is connected to the terminals, VAB = 6.83 V. Find VAB if a 29-kΩ load is connected to the terminals. Vth = V Rth = kΩ VAB across 29 kΩ load = V

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Consider the amplifier circuit in Fig. 4 which amplifies input Vin to output Vout. The circuit accomplishes this by using a bipolar junction transistor or BJT. The BJT is a three-terminal circuit element with nodes B, C, and E. In some situations, the BJT can be modeled with an equivalent linear circuit containing a voltage-dependent current source as shown in Fig. 5. Figure 4: Amplifier circuit with BJT Figure 5: Equivalent circuit model for BJT We want to find the Thevenin and Norton equivalent of the amplifier circuit across the terminals Vout (i. e. , between nodes C and E ). Note: You can use the parallel operator (||) in your final answers. (a) Redraw the original amplifier circuit in Fig. 4 but with the BJT equivalent circuit model in Fig. 5 substituted. (b) Use the open circuit test to find the Thevenin voltage, Vth , between nodes C and E. Recall the open circuit test finds Vout = Voc when an open circuit is connected across the terminals, then Vth = Voc. (c) Use the short circuit test to find the Norton current, Ino, between nodes C and E. Recall the short circuit test finds Iout = Isc when a short circuit is connected between the terminals, then Ino = Isc. (d) Find the Thevenin/Norton resistance Rth = Rno using Rth = Vth Ino. (e) We can also find Rth by turning off all of the independent sources (but not the dependent sources) and deriving the equivalent resistance seen from the terminals. Derive Rth with this method. Does it match your answer from part (c)? Hint: To simplify the dependent source, focus on first finding VBE.
Solution
0 0

Find the number of 74LS inputs that can be connected to the output of a 74AS gate. b) Which logic family gate inputs can be connected a 74H gate output without the need of any additional circuit? Explain your answer. c) Can a 74H gate output be connected to three 74AS gate inputs directly? Why? d) If a load is connected to the output of a 74 gate in the current source configuration, what is the maximum current that this load can draw from the gate? Refer to the following table to answer the questions below and show your work: Parameters 74H CMOS 74 TTL 74LS TTL 74AS TTL 74ALS TTL VIH 3.5 V 2 V 2 V 2 V 2 V VIL 1 V 0.8 V 0.8 V 0.8 V 0.8 V VOH 4.9 V 2.4 V 2.7 V 2.7 V 2.7 V VOL 0.1 V 0.4 V 0.4 V 0.4 V 0.4 V 1µA 40µA 20µA 200µA 20µA IL -1µA -1.6 mA -400µA -2 mA -100µA IOH -4mA -400µA -400µA -2mA -400µA IOL 4 mA 16 mA 8 mA 20 mA 4 mA
Solution
1 0

Find Io in the network in the figure below using Thévenin's theorem. Break the network at the 1k Ohm resistor containing I0. Vth = V Rth = kΩ Io = mA
Solution
0 0