Question

Notify Me Bookmark

If Vt = 0.7 V, identify the regions of operation of NMOS transistor. Please choose one: a) Saturation region b) Cannot identify c) Cut-off region d) Triode region

If Vt = 0.7 V, identify the regions of operation of NMOS transistor. Please choose one: a) Saturation region b) Cannot identify c) Cut-off region d) Triode region

Image text
If V t = 0.7 V , identify the regions of operation of NMOS transistor.
Please choose one: a) Saturation region b) Cannot identify c) Cut-off region d) Triode region

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Consider the CMOS Circuit shown below. The MOSFET parameters are kn’ = 3kp’ = 0.3 mA/V2, and VT = 0.7 V, and RX = 1 kΩ. a) Find the drain current ID = Correct Answer: .25 mA b) The region of operation of the NMOS transistor is Correct Answer: Triode, Linear c) The region of operation of the PMOS transistor is Correct Answer: Active, Saturation
Solution
0 0

Given the circuit shown in the following figure, and based on the 180 nm TSMC Technology, assume that the supply voltage (VDD) is 1.8 V, and the length of each transistor (n-type MOSFET) is fixed at L = 180 nm. Make reasonable assumptions for the widths of these transistors. Analyze this circuit by calculation and identify the regions of operation of the two MOSFETs and the drain-source current (IDs) of the MOSFETs, assuming that the transistors are ON. The threshold voltage of the MOSFET is given by Vth = 0.5 V, and μnCox = 70 μA/V2. Also given: VB = 0.7 V, and R = 1 KΩ.

Solution
0 0

A CMOS inverter show below with all required parameters. kn′ = 100 μA/V2, VT0n = 0.75 v, kp′ = 40 μA/V2, VT0p = −0.8 v Vin (input voltage to the inverter) a. Calculate the inverter threshold VM ? ( 5 points) b. Explain the inverter regions of operation with respect to slowly rising ramp signal from logic "0" to logic "1" as shown in figure? , Explain clearly using the transfer characteristic of the inverter, the status of NMOS and PMOS when you increase the input voltage from 0 V to VTN and to VDD/2 and to VDD−VTn and VDD in time T. ( 15 points) c. When does NMOS and PMOS bias itself to saturation and why this is a danger in integrated circuit design. What are possible solutions to suppress this issue? (5 points)

Solution
0 0