Question

Notify Me Bookmark

In the circuit of the figure: Data: VDD = 15 V R1 = 1 kΩ R2 = 1 kΩ R3 = 10 kΩ M1 and M2: k = 0.5 mA/V2 Vt = 3 VID = k(VGS − Vt)2 in saturation Questions: a) Calculate the voltage VGS in the transistor M1. Detail the used calculation procedure. b) Calculate the voltage VDS in M1. c) Justify the operating region in which the transistor M1 is working. d) Calculate the polarization point (ID, VDS) and the operating region of M2. Justify the answer.

In the circuit of the figure: Data: VDD = 15 V R1 = 1 kΩ R2 = 1 kΩ R3 = 10 kΩ M1 and M2: k = 0.5 mA/V2 Vt = 3 VID = k(VGS − Vt)2 in saturation Questions: a) Calculate the voltage VGS in the transistor M1. Detail the used calculation procedure. b) Calculate the voltage VDS in M1. c) Justify the operating region in which the transistor M1 is working. d) Calculate the polarization point (ID, VDS) and the operating region of M2. Justify the answer.

Image text
In the circuit of the figure: Data:
V D D = 15 V R 1 = 1 k Ω R 2 = 1 k Ω R 3 = 10 k Ω
M1 and M2:
k = 0.5 mA / V 2 V t = 3 V I D = k ( V GS − V t ) 2 in saturation
Questions: a) Calculate the voltage V GS in the transistor M 1 . Detail the used calculation procedure. b) Calculate the voltage V DS in M 1 . c) Justify the operating region in which the transistor M1 is working. d) Calculate the polarization point ( I D , V D S ) and the operating region of M2. Justify the answer.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

In the circuit below, VDD = 3 V, R1 = 50 kΩ, R2 = 100 kΩ, R3 = R4 = 5 kΩ, Rs = 1 kΩ and RL = 30 kΩ, C1, C2 and C3 have large values. The transistor operates at the DC point of ID = 0.2 mA, VDS = 1 V and VGS − VTN = 0.5 V. The transistor has λ = 0.1 V−1 and a negligible body effect. (a) Identify the circuit as a common-source, common-drain, or common-gate amplifier. (b) Calculate the small-signal parameters gm and rds of the transistor. (c) Draw an AC small-signal equivalent of the circuit, with the transistor represented by its small-signal model. (d) Calculate the AC small-signal voltage gain vo/vs. (e) Calculate the AC small-signal input and output resistances Rin and Rout.
Solution
0 0

In the circuit below, the supply voltage is VDD = 3.3 V, R1 = 120 kΩ, R2 = 60 kΩ, R3 = 30 kΩ, R4 = 10kΩ, CX = CY = CZ = ∞F, and the NMOS transistor has a transconductance parameter k = 4 mA/V2, a threshold voltage Vt = 0.5 V, and a channel-length modulation coefficient λ = 0.5 V-1 . (a) Without including the channel-length modulation, calculate the transistor dc voltages and currents, VG, VS, VD, and ID, and verify the transistor region of operation. (b) Calculate the small-signal transconductance gm and drain-to source resistance ro, sketch the small-signal equivalent circuit, find the small signal midband voltage gain vy/vx, when vx is connected to an ideal voltage source, vy is open-circuited and vz is grounded, and find the small-signal midband voltage gain vz/vx, when vx is connected to an ideal voltage source, vy is grounded and vz is open-circuited.
Solution
0 0

In the following circuit, V1 = −1.5 V, R1 = 3.3 kΩ, R2 = 29 kΩ, R3 = 10 kΩ and R4 = 4.7 kΩ. Supply voltage is VCC = 15 V and the operational amplifier saturates at ±14 V and can provide a current up to 10 mA. (a) Calculate an expression for vID as a function of vI and vO and indicate if the feedback positive or negative. (b) Calculate the operational amplifier output current (io) when vo = −14 V. (c) Sketch v0 vs. vl for (−12 V ≤ vI ≤ 12 V). Indicate coordinates of key points in graph (any of the following: saturation, output switching, zero crossings)
Solution
0 0