Question

Notify Me Bookmark

In the circuit shown, M1 and M2 serve as current sources. Assume kn' = 200 uA/V^2, kp' = 100 uA/V^2, Lambda = 0, and |VTH| = 0.4 V. Calculate IX and IY if VDD = 1.8 V, VB = 1 V, R = 1 k-ohm, and W/L = 20/0.25.

In the circuit shown, M1 and M2 serve as current sources. Assume kn' = 200 uA/V^2, kp' = 100 uA/V^2, Lambda = 0, and |VTH| = 0.4 V. Calculate IX and IY if VDD = 1.8 V, VB = 1 V, R = 1 k-ohm, and W/L = 20/0.25.

Image text
In the circuit shown, M1 and M2 serve as current sources. Assume kn' = 200 uA/V^2, kp' = 100 uA/V^2, Lambda = 0, and |VTH| = 0.4 V. Calculate IX and IY if VDD = 1.8 V, VB = 1 V, R = 1 k-ohm, and W/L = 20/0.25.

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)
  • Correct answers (1)
  • Complete solution (1)
  • Step-by-step solution (1)
  • Fully explained (1)

Similar/Related Questions

In the circuit shown, M1 and M2 serve as current sources. Assume kp'W/L = 8 uA/V^2, Lambda = 0, and |VTH| = 0.6 V. Calculate IX and IY if VDD = 1.8 V, VB = 1 V,R = 1 kohm.
Solution
0 0

For the amplifier below, following design information is provided: VDD = 3.3 V, R = 2.4 kΩ, ISS = 1.8 mA, k1 = k2 = 5 mA/V2, VTH,1 = VTH,2 = 0.5 V, λ = 0.1 V−1, γ = 0, ki′ = μ0Cox, ki = μ0 Cox(W L)i. Assume that both transistors are identical and in the saturation region. Finally, NMOS and PMOS bulk terminals are connected to the ground and VDD, respectively. a) What is the DC bias voltage for M1 and M2 given that the voltage drop across ISS is 0.4 V ? You can neglect the channel length modulation, here. Check that the transistors are in the correct operation-mode. b) The resistors will be realized using identical PMOS transistors M3 and M4. If the transistors to be used will have k3 = k4 = 1.5 mA/V2, what will be their overdrive voltages? Check that the transistors are in the correct operation-mode. c) What is the differential voltage gain AV,diff = Vout/Vid in dB ? d) ISS will be realized as a cascode current source. Assume that the voltage drop of 0.4 V is equally shared by the two transistors, M5 and M6 having k5′ = k6′ = 0.5 mA/V2 and VTH, 5 = VTH, 6 = 0.5 V. Assuming the gate voltages of both transistors are 1 V, find the W/L ratios of each device. Once again, you can neglect the channel length modulation here. e) Considering (d), how would the W/L ratios qualitatively change (increase/decrease/stays the same), if γ > 0 ? Explain your reasoning analytically, i. e. , using appropriate equations. f) Using the cascode current source, calculate the common-mode gain of the circuit AV, CM = Vout /Vin in dB, where Vin . s applied to the gates of both M1 and M2. Assume λ = 0.1 V−1 for M5 and M6. g) Calculate the CMRR of the circuit in dB.
Solution
0 0

In the following circuit assume that all transistors are operating in the saturation region. Also, assume that λ = γ = 0, VDD = 1.8 V, Vbias3 = 1.15 V, VTN = 0.4 V and VTP = −0.4 V, μnCox = 800 μA/V2, (W/L)1 = 40, μpCox = 400 μA/V2, (W/L)2 = 40, (W/L)3 = 40, and RS = 100 Ω. a) Find Vbias1 such that the bias current of M1 is I1 = 1 mA. b) Calculate the small-signal voltage gain AV1 = Vout1/Vin . c) Calculate the small-signal output impedance seen at the output node Vout1.
Solution
0 0