Question

Notify Me Bookmark

In the following circuit R1 = R2 = 1 kΩ, the threshold voltage for forward bias is 0, 7 V, and the dynamic resistance of the diode is 0 Ω. What is the value of the output voltage UOUT when the VIN = −5 V ? (A) VOUT = −5 V (B) VOUT = 0∨ (C) VOUT = −0, 7 V (D) VOUT = −2,5 V (E) VOUT = −1,8 V

In the following circuit R1 = R2 = 1 kΩ, the threshold voltage for forward bias is 0, 7 V, and the dynamic resistance of the diode is 0 Ω. What is the value of the output voltage UOUT when the VIN = −5 V ? (A) VOUT = −5 V (B) VOUT = 0∨ (C) VOUT = −0, 7 V (D) VOUT = −2,5 V (E) VOUT = −1,8 V

Image text
  1. In the following circuit R 1 = R 2 = 1 k Ω , the threshold voltage for forward bias is 0,7 V, and the dynamic resistance of the diode is 0 Ω . What is the value of the output voltage U OUT when the V I N = − 5 V ? (A) V OUT = − 5 V (B) V OUT = 0 ∨ (C) V OUT = − 0 , 7 V (D) V OUT = − 2 , 5 V (E) V OUT = − 1 , 8 V

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

In this amplifier circuit, the high and low DC voltage sources are: VDD = 5 V and VSS = −5 V respectively. Consider that all three external capacitors have high values. The PMOS transistor has a threshold voltage equal to Vt = −1 V and kp = kp′(W/L) = 0.4 mA/V2, and the NMOS transistor has a threshold voltage Vt = 1 V and a kn = kn′(W/L) = 2 mA/V2. It was shown in HW#7 that the DC drain voltage of the PMOS transistor is −0.2 V and the DC source of the NMOS transistor is −2 V. a) Perform the small signal analysis of this circuit and determine the voltage gain: AV = Vo/Vi b) Determine the input and output resistance of this amplifier Rin and Rout . c) Discuss what is the purpose of the part of the circuit between CC2 and CC3 which includes the NMOS transistor in this amplifier design. d) Determine the parameters of a simple voltage amplifier model (discussed in chapter 1) which will represent this amplifier. Note that the parameters of the simple voltage amplifier excludes any series resistance of the external source ( Vi ) (in this case it is zero anyway) and the load resistance (in this case RL = 2 kΩ ). e) Using the simple model from part (c) determine the voltage gain AV = Vo/Vi and see if it agrees with the answer of part (a). VDD
Solution
0 0

Figure 1 shows a single stage common source MOSFET amplifier circuit. We wish to design the circuit to meet the following design specifications: Load Resistance: RL = 100 KΩ Input Resistance: Ri > 200 KΩ Mid-band Gain: Gv = Vo/Vi = −50 ± 20% Supply Voltage: +15 Volts Circuit Capacitors: CG = 10μF; CS = 47μF; CD = 10μF Figure 1. Common Source MOSFET Amplifier Pre-lab: (a) Design the amplifier to meet the specifications above by choosing values for resistors R1, R2, RD and RS. Begin your design by choosing an appropriate value for the bias current ID. If ID ≈ 0.3 mA, assume VT ≈ 1.7 V, Kn ≈ 0.02 A/V2 and VA = 100 V(λ = 0.01 V−1). Find the small signal approximation of the input resistance Rin where Rin = R1∥R2 Find the small signal approximation of the output resistance Ro, where Ro is given as Ro = RD∥RL∥ro. The small signal mid-band gain of the amplifier is given by Gv = −gmRo where gm = 2knID = kn(VGS−VT) Once you choose ID the DC biasing of the transistor can be found using simple rules of thumb. The voltage VG should be approximately equal to VDD/3 > VT. For maximum symmetry, VD should be biased at the midpoint between VD(Max) and VD(Min). Clearly, the maximum VD is VDD and the minimum VD > VG−Vt. For example, if Vt = 1.7 V and VG = 1/3VDD = 5 V, then VD ≈ 9 V for maximum symmetry.

Figure 1 shows a single stage common source MOSFET amplifier circuit. We wish to design the circuit to meet the following design specifications: Load Resistance: RL = 100 KΩ Input Resistance: Ri > 200 KΩ Mid-band Gain: Gv = Vo/Vi = −50 ± 20% Supply Voltage: +15 Volts Circuit Capacitors: CG = 10μF; CS = 47μF; CD = 10μF Figure 1. Common Source MOSFET Amplifier Pre-lab: (a) Design the amplifier to meet the specifications above by choosing values for resistors R1, R2, RD and RS. Begin your design by choosing an appropriate value for the bias current ID. If ID ≈ 0.3 mA, assume VT ≈ 1.7 V, Kn ≈ 0.02 A/V2 and VA = 100 V(λ = 0.01 V−1). Find the small signal approximation of the input resistance Rin where Rin = R1∥R2 Find the small signal approximation of the output resistance Ro, where Ro is given as Ro = RD∥RL∥ro. The small signal mid-band gain of the amplifier is given by Gv = −gmRo where gm = 2knID = kn(VGS−VT) Once you choose ID the DC biasing of the transistor can be found using simple rules of thumb. The voltage VG should be approximately equal to VDD/3 > VT. For maximum symmetry, VD should be biased at the midpoint between VD(Max) and VD(Min). Clearly, the maximum VD is VDD and the minimum VD > VG−Vt. For example, if Vt = 1.7 V and VG = 1/3VDD = 5 V, then VD ≈ 9 V for maximum symmetry.
Solution
1 0

For the circuit shown in Figure 1, NMOS device M1 has the following properties: kn’(W/L) = 180 μA/V2, VT0 = 2 V, λ = 0.02 V-1, γ = 0.4 V1/2, 2ϕF = 0.7 V, and ID = 10 mA. Note that capacitor Cbig is a DC blocking cap, i.e., Cbig is an open at DC and a short at all other frequencies. Figure 1. Circuit for Problem 1. a) Determine the numerical value of bias voltage Vbias which is needed to achieve a drain current of ID = 10 mA. b) Draw the small-signal equivalent circuit. c) Analyze the small-signal circuit to find Rin, Rout, and Av = Vout/Vin. Find the analytic expression for each quantity first, before determining the numerical answers. d) Recall that gmb/gm = χ. Determine the numerical value of χ for this problem. [Note that this part has nothing to do with parts (b) and (c).] e) What is the threshold voltage of device M1? [Note that this part has nothing to do with parts (b) and (c).] Show your work, list all numerical values in proper engineering notation format with appropriate units and with at least two decimal places of precision.
Solution
0 0