Question

Notify Me Bookmark

In the following circuits, find range of Vin in which transistors remain in saturation. Kn = 200 uA/V2, Vth = 0.5 V, Vdd = 2 V, W/L = 10

In the following circuits, find range of Vin in which transistors remain in saturation. Kn = 200 uA/V2, Vth = 0.5 V, Vdd = 2 V, W/L = 10

Image text
In the following circuits, find range of Vin in which transistors remain in saturation. Kn = 200 uA/V2, Vth = 0.5 V, Vdd = 2 V, W/L = 10

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)

Similar/Related Questions

Question 1( d): In the following circuits, find range of Vin in which transistors remain in saturation. Kn = 200 uA/V2, Vth = 0.5 V, Vdd = 2 V, W/L = 10
Solution
1 0

a) Assuming we can control the VIN between 0.5 V and 2.5 V, find the maximum value for resistor R as a function of VIN for the NMOS to stay in saturation. Note: The pullup resistor R is preferred to be large, a bit too large, and we go into the linear region of operation. b) Assume we want to keep the VOUT at 1.5 V, and ID at 200 uA. What should be the values for bias voltage VIN and resistor R? c) Based on part (b) values, find the maximum and minimum values for VOUT and VIN so that the NMOS stays in saturation. d) Based on part (b) values, find open circuit small signal gain, AV. Hint: Need to find values for gm and g0 first. For the following NMOS amplifier (driving load RL ) with the following parameters: Vdd = 2.5v Vbs = 0 RL = 10 k Vt0 = 0.5v lambda = 0.11v-1 W/L = 10 unCox = 200.0 uA/V2 Suppose the load resistor, RL, is not connected (open circuit):

Solution
1 0

In Fig. 5, VDD = 10 V, (W/L)1 = (1/0.1), (W/L)2 = (10/0.1), I1 = 100 μA, I2 = 150 μA. C1 is very large. Assume that all the transistors are in saturation. μnCox = 100 μA/V2, μpCox = 40 μA/V2, Vthn = |Vthp| = 0.5 V, λn = λp = 0 (a) For Vin = 2 V, determine VX. (b) Determine the small-signal gain of the amplifier. Figure 5
Solution
0 0