Question

Notify Me Bookmark

In this question, choose values for R2 and R1 in the above circuit so that output signal is an undistorted sine wave of 10 volts peak amplitude. The op amp is characterized by the device parameters listed to the right of the circuit. R2, R1 values: 20 Ω, 1 Ω 400 Ω, 10 Ω 2 kΩ, 50 Ω 40 Ω, 1Ω 1 kΩ, 50 Ω Op-amp Parameters: vOMAX = ±23 V iOMAX = ±10 mA ft = 5MHz SR = 10 V/μs

In this question, choose values for R2 and R1 in the above circuit so that output signal is an undistorted sine wave of 10 volts peak amplitude. The op amp is characterized by the device parameters listed to the right of the circuit. R2, R1 values: 20 Ω, 1 Ω 400 Ω, 10 Ω 2 kΩ, 50 Ω 40 Ω, 1Ω 1 kΩ, 50 Ω Op-amp Parameters: vOMAX = ±23 V iOMAX = ±10 mA ft = 5MHz SR = 10 V/μs

Image text
In this question, choose values for R2 and R1 in the above circuit so that output signal is an undistorted sine wave of 10 volts peak amplitude. The op amp is characterized by the device parameters listed to the right of the circuit. R2, R1 values: 20 Ω, 1 Ω 400 Ω, 10 Ω 2 kΩ, 50 Ω 40 Ω, 1Ω 1 kΩ, 50 Ω Op-amp Parameters: vOMAX = ±23 V iOMAX = ±10 mA ft = 5MHz SR = 10 V/μs

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

An NMOS amplifier is shown in Figure 1. Transistor M1 is biased in the saturation region for an amplifier application. The circuit is biased with a resistive voltage divider consisting of R1 and R2, a source degeneration resistor RS, and a load resistor RD. The drain bias current for the design is ID = 500 μA and VDS is 1.625 V. The device parameters are: L = 0.5 μm, W = 10 μm, kn’ = 200 μA/V2, Vtn = 0.5 V, and λn = 0. analyze the frequency response of the amplifier. a) Draw a midband small signal ac equivalent circuit model for the amplifier. For midband you can assume the reactance of Cin is sufficiently low that it is a short circuit. b) Derive an expression for the midband voltage gain transfer function Vout /Vsig. The amplified output signal is taken from the drain terminal and Vout = Vd. Write your gain function in terms of variables only. c) Evaluate the midband gain and calculate a value both in V/V and dB. d) Analyze the frequency response of the input network including the capacitor Cin. Find an expression for the transfer function H1(jω) = Vg/Vsig. e) Evaluate H1(jω) = Vg/Vsig and make a Bode plot of the magnitude of H1(jω). The x-axis is ω (log scale) and the y-axis is the magnitude in dB. f) Use the LTSPICE circuit template and verify the frequency response of the amplifier circuit. Include a copy of the schematic and the frequency response plot. Use 20 points per decade and a frequency span of 0.1 Hz to 100 Hz.
Solution
0 0

An op amp with parameters as listed is used in the circuit shown above. In this question, calculate the worst-case maximum error voltage, VO,ERROR, at the output due to the input bias currents only: OV ± 198mV ± 126mV ± 99mV Op-amp Parameters: AOL = ∞ V/V VOS = 12.5 mV IB = 4 0nA IOS = 10 nA ft = 2 MHz
Solution
0 0

Consider the noninverting amplifier circuit shown in Fig. 5. As shown, the circuit is designed for a nominal gain (1 + R2/R1) = 10 V/V. It is fed with a low-frequency sine-wave signal of peak voltage V p and is connected to a load resistor RL. The op amp is specified to have output saturation voltages of ±13 V and output current limits of ±20 mA. a. For Vp = 1 V and RL = 1 k, specify the signal resulting at the output of the amplifier. b. For Vp = 1.5 V and RL = 1 k, specify the signal resulting at the output of the amplifier. c. For RL = 1 k, what is the maximum value of Vp for which an undistorted sine-wave output is obtained? d. For Vp = 1 V, what is the lowest value of RL for which an undistorted sine-wave output is obtained? 5 (a)
Solution
0 0