Question

Notify Me Bookmark

It is required to operate the transistor in the circuit of Fig. P5.47 at the edge of saturation with ID = 0.1 mA. If Vt = 0.4 V, find the required value of RD.

It is required to operate the transistor in the circuit of Fig. P5.47 at the edge of saturation with ID = 0.1 mA. If Vt = 0.4 V, find the required value of RD.

It is required to operate the transistor in the circuit of Fig. P5.47 at the edge of saturation with ID = 0.1 mA. If Vt = 0.4 V, find the required value of RD.

Image text
It is required to operate the transistor in the circuit of Fig. P5.47 at the edge of saturation with ID = 0.1 mA. If Vt = 0.4 V, find the required value of RD.

Detailed Answer

3 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (3)
  • Correct answers (3)
  • Complete solution (3)
  • Step-by-step solution (3)
  • Fully explained (3)

Similar/Related Questions

The NMOS transistor in the circuit below has μnCox = 0.4 mA/V2, W/L = 25, and Vt = 0.4 V. (a) Find the value of VGS that results in saturation mode operation with a dc current of ID = 0.1 mA. Neglect the Early effect. (b) Find the value of RD that results in a dc drain voltage of 0.5 V. (c) Find gm and ro at the dc operating point specified above. Assume VA = 5 V. (d) Find the open-circuit voltage gain Avo. (e) If a sinusoidal signal with peak amplitude v^i is superimposed on the dc voltage VGS, find the maximum allowable value of v^i for which the transistor operates in saturation.
Solution
1 0

The NMOS amplifier below is to be designed to provide a 0.2 V peak output signal. Assume VDD = 1.8V, RD = 10kΩ. (4 points each part) a) If the gain is to be −10 V/V, what gm is required? b) Bias the amplifier as close to the edge of the saturation region as possible consistent with the required signal swing. Specify the required values of VOV and ID. c) If kn′ = 380 μA/V2, what W/L ratio is required? d) If Vt = 0.4 V, find VGS. D 7.26 The NMOS amplifier of Fig. 7.10 is to be designed to provide a 0.2−V peak output signal. Assume VDD = 1.8 V and RD = 10 kΩ. If the gain is to be −10 V/V, what gm is required? Bias the amplifier as close to the edge of the saturation region as possible consistent with the required signal swing. Specify the required values of VOV and ID. If kn′ = 380 μA/V2 what W/L ratio is required? If Vt = 0.4 V, find VGS.

The NMOS amplifier below is to be designed to provide a 0.2 V peak output signal. Assume VDD = 1.8V, RD = 10kΩ. (4 points each part) a) If the gain is to be −10 V/V, what gm is required? b) Bias the amplifier as close to the edge of the saturation region as possible consistent with the required signal swing. Specify the required values of VOV and ID. c) If kn′ = 380 μA/V2, what W/L ratio is required? d) If Vt = 0.4 V, find VGS. D 7.26 The NMOS amplifier of Fig. 7.10 is to be designed to provide a 0.2−V peak output signal. Assume VDD = 1.8 V and RD = 10 kΩ. If the gain is to be −10 V/V, what gm is required? Bias the amplifier as close to the edge of the saturation region as possible consistent with the required signal swing. Specify the required values of VOV and ID. If kn′ = 380 μA/V2 what W/L ratio is required? If Vt = 0.4 V, find VGS.
Solution
2 0

For the circuit in Fig. E5.10, assume that Q1 and Q2 are matched except for having different widths, W1 and W2. Let Vt = 0.5 V, k’n = 0.4 mA/V2, L1 = L2 = 0.36 μm, W1 = 1.44 μm, and λ = 0. (a) Find the value of R required to establish a current of 50 μA in Q1. (b) Find W2 andR2 so thatQ2 operates at the edge of saturation with a current of 0.5 mA Figure E5.10

For the circuit in Fig. E5.10, assume that Q1 and Q2 are matched except for having different widths, W1 and W2. Let Vt = 0.5 V, k’n = 0.4 mA/V2, L1 = L2 = 0.36 μm, W1 = 1.44 μm, and λ = 0. (a) Find the value of R required to establish a current of 50 μA in Q1. (b) Find W2 andR2 so thatQ2 operates at the edge of saturation with a current of 0.5 mA Figure E5.10

Solution
2 0