Question

Notify Me Bookmark

MOSFET (10%) Transfer ID−VG characteristic of a MOSFET at 360 K is shown in figure below. (a) What is the subthreshold swing? (4%) (b) Decrease the temperature to 240 K, please plot is ID-VG characteristic against the curve below (compare with the one measured at 360 K), what is the subthreshold swing at 240 K? ( 6%)

MOSFET (10%) Transfer ID−VG characteristic of a MOSFET at 360 K is shown in figure below. (a) What is the subthreshold swing? (4%) (b) Decrease the temperature to 240 K, please plot is ID-VG characteristic against the curve below (compare with the one measured at 360 K), what is the subthreshold swing at 240 K? ( 6%)

Image text
MOSFET (10%) Transfer I D − V G characteristic of a MOSFET at 360 K is shown in figure below. (a) What is the subthreshold swing? (4%) (b) Decrease the temperature to 240 K , please plot is I D ⋅ V G characteristic against the curve below (compare with the one measured at 360 K ), what is the subthreshold swing at 240 K ? ( 6 % )

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Transfer ID−VG characteristic of a MOSFET at 360 K is shown in figure below. (a) What is the subthreshold swing? (4%) (b) Decrease the temperature to 240 K, please plot is ID⋅VG characteristic against the curve below (compare with the one measured at 360 K), what is the subthreshold swing at 240 K? (6%)

Solution
0 0

6.7 One Ids − Vds curve of an ideal MOSFET is shown in Fig. 6-43. Note that Idsat = 10 −3 A and Vdsat = 2 V for the given characteristic. (You may or may not need the following information: m = 1, L = 0.5 μm, W = 2.5 μm, TOX = 10 nm. Do not consider velocity saturation.) (a) Given a Vt of 0.5 V, what is the gate voltage Vgs one must apply to obtain the I−V curve? (b) What is the inversion-layer charge per unit area at the drain end of the channel when the MOSFET is biased at point (1) on the curve? (c) Suppose the gate voltage is changed such that Vgs−Vt = 3 V. For the new condition, determine Ids at Vds = 4 V. (d) If Vd = Vs = Vb = 0 V, sketch the general shape of the gate capacitance C vs. Vg to be expected from the MOSFET, when measured at 1 MHz. Do not calculate any capacitance but do label the Vg = Vt point in the C−V curve.
Solution
0 0

A disk of mass m1 = 70.0 g and radius r1 = 3.50 cm slides on a frictionless sheet of ice with velocity v→, where v = 14.00 m/s, as shown in a top-down view in figure (a) below. The edge of this disk just grazes the edge of a second disk in a glancing blow. The second disk has a mass m2 = 140 g, a radius r2 = 5.00 cm, and is initially at rest. As the disks make contact, they stick together due to highly adhesive glue on the edge of each, and then rotate after the collision as shown in figure (b). (i) (a) What is the magnitude of the angular momentum (in kg⋅m2 /s ) of the two-disk system relative to its center of mass? kg⋅m2/s (b) What is the angular speed (in rad/s) about the center of mass? rad/s

Solution
3 0