Question

Notify Me Bookmark

Problem 3 [20 points]: For the circuit below, assume R = 3 Ω, L = 2 H, C = 1 24 F, and A = 12 V. Find the capacitor current ic(t), t ≥ 0 using the Laplace transformation method.

Problem 3 [20 points]: For the circuit below, assume R = 3 Ω, L = 2 H, C = 1 24 F, and A = 12 V. Find the capacitor current ic(t), t ≥ 0 using the Laplace transformation method.

Image text
Problem 3 [20 points]: For the circuit below, assume R = 3 Ω , L = 2 H , C = 1 24 F , and A = 12 V . Find the capacitor current i c ( t ) , t ≥ 0 using the Laplace transformation method.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

For the circuit below, VCC = 20 V, VBE1 = VBE2 = 0.8 V, β = 300, VT = 25 mV, VA = ∞, R1 = 230 kΩ, R2 = 120 kΩ, RC1 = 12 kΩ, RC2 = 6 kΩ, RE1 = 500 Ω, RE2 = 3 kΩ, and RE3 = 4.5 kΩ are given. C∞s are very large coupling/bypass capacitors. a. Find the operating collector currents of T1 and T2. Neglect the base currents and assume α = 1. b. Find the value of RL1 such that the second stage output has symmetric clipping property. Assume VCEsat = 1.5 V. c. What is the voltage gain of the amplifier in dB ? d. Now, assume that the amplifier should drive a load of RL2 = 270 Ω. For this purpose, the circuit on the right is coupled to the node X in the multi-stage amplifier. Explain why this circuit has been preferred. a. Find the value of IDC given that kn,T3 = 30 mA/V2 and λ = 0, such that the voltage gain of the newly-added stage is AV, T3 = 0.9. Assume that T3 operates in the saturation region.
Solution
0 0

Problem 1: For the CE Amp circuit in Figure 1, let |VBE| = 0.7 V, β = 100, R1 = 20 kΩ, R2 = 3.6 kΩ, RL = 1.2 kΩ, RE = 0.22 kΩ. VCC = 12 V. Assume IE = 5 mA. Find the overall voltage gain. Show all steps including redrawing the circuit for small signal analysis, the small signal model, and compute the small signal parameters and the gain. Find the actual IE for the circuit, show steps including any equivalent circuit Figure 1. CE Amplifier Circuit
Solution
0 0

a. For the circuit shown below, show a clean and labeled small signal equivalent circuit and derive the expression for vo/vb, (vb is the small signal voltage at the base node) vo/vsig, Rin and Rout. (b) This is the design part. The specifications are as follows: The required gain vo/vb = −120 V/V, Ic = 1 mA. and the require voltage swing at the output is ±3 V around the DC value of the output. (Hint: Do not use the generic design rule. You should be able to find the DC voltages at the collector and emitter from the specifications). Assume Vcc = 8 V. For this design assume VA = ∞ (this makes ro = ∞), V T (Thermal Voltage) = 25 mV, VBE = 0.7 V, VCEsat = 0.3 V and β = ∞. Find the values of RC, RE, RB1, and RB2. (c) If the β = 100 instead of the design value, find the new Ic. Now assuming VA = 50 V find vo/vsig, Rout and RIN. For this part assume Rsig = 10 kΩ. Punt: If you could not answer (b), use RC = 3 kΩ, RE = 2 kΩ, RB1 = 50 kΩ, and RG2 = 30 kΩ (d) Run a transient simulation of the designed circuit in Multisim. Use the same BJT used in the lab simulation. Show the input voltage v sig and output voltage v o on the same plot. Choose vsig to be at 1 kHz and 10 mV peak sinusoidal. Compare with calculated value of the gain in part c.
Solution
0 0