Question

Notify Me Bookmark

Q1) For the TTL inverter given below a) Find RC/RD ratio using the given voltage transfer characteristic. b) Find RC/RB ratio NoH,max is 10 with 0.6 V high noise margin. c) Find NoL,max. d) Average power dissipation of the given TTL is 5.05 mW when ten similar gates are connected, find RB, RC, and RD.

Q1) For the TTL inverter given below a) Find RC/RD ratio using the given voltage transfer characteristic. b) Find RC/RB ratio NoH,max is 10 with 0.6 V high noise margin. c) Find NoL,max. d) Average power dissipation of the given TTL is 5.05 mW when ten similar gates are connected, find RB, RC, and RD.

Image text
Q1) For the TTL inverter given below a) Find R C / R D ratio using the given voltage transfer characteristic. b) Find R C / R B ratio N o H , max is 10 with 0.6 V high noise margin. c) Find NoL,max. d) Average power dissipation of the given TTL is 5.05 m W when ten similar gates are connected, find R B , R C , and R D .

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

For the TTL inverter given below a) Find RC /RD ratio using the given voltage transfer characteristic. b) Find RC/RB ratio NOH,max is 10 with 0.6 V high noise margin. c) Find NOL,max. d) Average power dissipation of the given TTL is 5.05 mW when ten similar gates are connected, find RB, RC , and RD. VCC = 5 V βF = 45 αF ≈ 1 βR = 0.5 σ = 0.9 VBE(FA) = 0.7 V VBE(SAT) = 0.8 V VCE(SAT) = 0.2 V VBC(RA) = 0.7 V VD = 0.7 V
Solution
0 0

Consider the basic TTL inverter given in Figure 2. Assume that VBE = 0.7 V, VBE(SAT) = 0.8 V, VCE(SAT) = 0.2 V, VBC = 0.7 V, βf = 50, βR = 0.1. Use σ0 = 0.8 (saturation parameter of Q0) for the output low state. i) Find the operation mode of each BJT and IIN, IRB, IRC, IB2 when Vin = 0 V and Vin = 5 V. ii) Sketch the voltage transfer characteristics by finding VOL, VOH, VIL, VIH. iii) Find the noise margins. iv) Find the maximum fanout. What is the limiting case for determining the fan-out limit of this circuit?

Consider the basic TTL inverter given in Figure 2. Assume that VBE = 0.7 V, VBE(SAT) = 0.8 V, VCE(SAT) = 0.2 V, VBC = 0.7 V, βf = 50, βR = 0.1. Use σ0 = 0.8 (saturation parameter of Q0) for the output low state. i) Find the operation mode of each BJT and IIN, IRB, IRC, IB2 when Vin = 0 V and Vin = 5 V. ii) Sketch the voltage transfer characteristics by finding VOL, VOH, VIL, VIH. iii) Find the noise margins. iv) Find the maximum fanout. What is the limiting case for determining the fan-out limit of this circuit?
Solution
0 0

For the CMOS inverter with given voltage transfer characteristics and schematic, a) Find (VI, VO) in terms of VDD, VTn, VTp, Kn, Kp, and VM at points A, B, C, and D. For points B and C, use VM as the value of VI. b) Determine the states of the transistors in each region (I-to-V). Note that region III corresponds to the line between points B and C. You do not need to verify the states c) Derive VM in terms of VDD, VTn, VTp, Kn, and Kp. For VDD = 5 V and VTn = |VTP| = 1 V, find Kn/Kp to design a CMOS inverter with VM = 0.6 VDD = 3 V.
Solution
0 0