Question

Notify Me Bookmark

Q10. For the circuit with I = 1 mA, RG = 0, RD = 5 kΩ, and VDD = 10 V, consider the behavior in each of the following two cases. In each case, find the voltages Vs, VD & VDSS that result (a) Vt = 1 V and kn′W/L = 0.5 mA/V2 (b) Vt = 2 V and kn′W/L = 1.25 mA/V2

Q10. For the circuit with I = 1 mA, RG = 0, RD = 5 kΩ, and VDD = 10 V, consider the behavior in each of the following two cases. In each case, find the voltages Vs, VD & VDSS that result (a) Vt = 1 V and kn′W/L = 0.5 mA/V2 (b) Vt = 2 V and kn′W/L = 1.25 mA/V2

Image text
Q10. For the circuit with I = 1 m A , R G = 0 , R D = 5 k Ω , and V D D = 10 V , consider the behavior in each of the following two cases. In each case, find the voltages V s , V D & V DSS that result (a) V t = 1 V and k n ′ W / L = 0.5 m A / V 2 (b) V t = 2 V and k n ′ W / L = 1.25 m A / V 2

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

5.106 For the circuit in Fig. 5.55 (a) with I = 0.2 mA, RG = 0, RD = 10 kΩ, and VDD = 2.5 V, consider the behavior in each of the following two cases. In each case, find the voltages VS, VD, and VDS that result. (a) Vt = 1 V and kn = 1.6 mA/v2 (b) Vt = 0.8 V and kn = 1.25 mA/V2

5.106 For the circuit in Fig. 5.55 (a) with I = 0.2 mA, RG = 0, RD = 10 kΩ, and VDD = 2.5 V, consider the behavior in each of the following two cases. In each case, find the voltages VS, VD, and VDS that result. (a) Vt = 1 V and kn = 1.6 mA/v2 (b) Vt = 0.8 V and kn = 1.25 mA/V2
Solution
0 0

D 7.98 Design the circuit in Fig. P7.98 so that the transistor operates in saturation with VD biased 1 V from the edge of the triode region, with ID = 1 mA and VD = 3 V, for each of the following two devices (use a 10-μA current in the voltage divider): (a) |Vt| = 1 V and kp'W/L = 0.5 mA/V2 (b) |Vt| = 2 V and kp'W/L = 1.25 mA/V2 For each case, specify the values of VG, VD, VS , R1, R2, RS , and RD.

Design the circuit in Fig. P7.98 so that the transistor operates in saturation with VD biased 1 V from the edge of the triode region, with ID = 1 mA and VD = 3 V, for each of the following two devices (use a 10-uA current in the voltage divider): (a) |Vt| = 1 V and kp'W/L = 0.5 mA/V2 (b) |Vt| = 2 V and kp'W/L = 1.25 mA/V2 Figure P7.98 For each case, specify the values of VG, VD, VS, R1, R2, RS, and RD. Figure P7.98

Solution
1 0

For the amplifier below, following design information is provided: VDD = 3.3 V, R = 2.4 kΩ, ISS = 1.8 mA, k1 = k2 = 5 mA/V2, VTH,1 = VTH,2 = 0.5 V, λ = 0.1 V−1, γ = 0, ki′ = μ0Cox, ki = μ0 Cox(W L)i. Assume that both transistors are identical and in the saturation region. Finally, NMOS and PMOS bulk terminals are connected to the ground and VDD, respectively. a) What is the DC bias voltage for M1 and M2 given that the voltage drop across ISS is 0.4 V ? You can neglect the channel length modulation, here. Check that the transistors are in the correct operation-mode. b) The resistors will be realized using identical PMOS transistors M3 and M4. If the transistors to be used will have k3 = k4 = 1.5 mA/V2, what will be their overdrive voltages? Check that the transistors are in the correct operation-mode. c) What is the differential voltage gain AV,diff = Vout/Vid in dB ? d) ISS will be realized as a cascode current source. Assume that the voltage drop of 0.4 V is equally shared by the two transistors, M5 and M6 having k5′ = k6′ = 0.5 mA/V2 and VTH, 5 = VTH, 6 = 0.5 V. Assuming the gate voltages of both transistors are 1 V, find the W/L ratios of each device. Once again, you can neglect the channel length modulation here. e) Considering (d), how would the W/L ratios qualitatively change (increase/decrease/stays the same), if γ > 0 ? Explain your reasoning analytically, i. e. , using appropriate equations. f) Using the cascode current source, calculate the common-mode gain of the circuit AV, CM = Vout /Vin in dB, where Vin . s applied to the gates of both M1 and M2. Assume λ = 0.1 V−1 for M5 and M6. g) Calculate the CMRR of the circuit in dB.
Solution
0 0