Question

Notify Me Bookmark

Q6. The network in figure below operates at a resonant frequency of ω = 2000 rad/s. Select the values for the unknown circuit elements so that the circuit has a Q = 50. Then find the value of the voltage across the capacitor. L = mH R = Ohm VC = ∠ V (phasor)

Q6. The network in figure below operates at a resonant frequency of ω = 2000 rad/s. Select the values for the unknown circuit elements so that the circuit has a Q = 50. Then find the value of the voltage across the capacitor. L = mH R = Ohm VC = ∠ V (phasor)

Image text
Q6. The network in figure below operates at a resonant frequency of ω = 2000 r a d / s . Select the values for the unknown circuit elements so that the circuit has a Q = 50 . Then find the value of the voltage across the capacitor.
L = m H R = V C =
Ohm ∠ V (phasor 형식)

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

The figure below shows a cylindrical container with an outlet valve. The cylinder is filled with water until the water level is a distance L = 20 cm from the top. A vibrating tuning fork is placed near the top of the cylinder and the valve is opened so that the length L slowly increases. If the tuning fork has a frequency of f = 502 Hz, determine the next two values of L (in m ) that correspond to a resonant mode. (Assume that the speed of sound in air is 343 m/s. ) (i) first length m second length m

Solution
3 0

You are told to find the transfer function of the following circuit. You know that the transfer function will take the form H(ω) = jA/(R+jB), where A and B are variables that depend on component values and the input signal frequency. Find the value of B, given the following values: R = 2 kΩ, L = 9.1 mH, C = 559 μF, ω = 2,392 rad/s. Please enter the answer to 3 significant figures.

Solution
0 0

Consider the shown circuit, where R = 500 Ω, L = 40 μH, C = 30 nF, and Vs is a sinusoidal source with a peak amplitude of 5 V. (Vs(t) = 5 cos⁡(ωt)V) Part 1: Hand Calculation a) Assume the source has a frequency of 140 kHz, calculate: the impedance Z seen by the source (expressed as a complex number and as magnitude/phase). Is the impedance capacitive or inductive? the source current Is. (Expressed as a Phasor and as a time function)the voltage Vo (Expressed as a Phasor and as a time function) b) Repeat part (a) at a frequency of 148 kHz c) Calculate the resonant frequency of the circuit (the frequency at which the reactive components cancel each other) d) find the impedance of the circuit at the resonant frequency e) Calculate the Quality factor and the 3-dB bandwidth of the circuit. Note that the resonator (LC circuit) is parallel Part 2: Simulation Draw the circuit on LTSpice a) Perform AC analysis (from 130 kHz to 170 kHz, use linear scale with 10000 points) and plot the following on a separate plot: The voltage (Vo)The current (Is)The impedance seen by the source b) From the plots verify your results in the hand calculation for parts (a) and (b) c) from the plots find the resonant frequency d) From the voltage plot, find the 3-dB bandwidth. Notes: The default Y-scale for AC analysis in LTSpice is dB, you can change it to linear To plot the impedance, add a trace and plot the expression of V over I Homework submission is through the Moodle platform Submit a single compressed file containing: The hand calculations Screenshot showing the circuit and the simulation results The schematic file (.asc)The netlist file (.net)

Solution
0 0