Question

Notify Me Bookmark

Q7. Assume that the AC small signal parameters of the BJT are gm,Q1, rπ,Q1, ro,Q1, βQ1, and the AC small signal parameters of the MOSFETs are gm,Mi, gmb,Mi, ro,Mi, where i = 1, 2. Write down the expressions for the small signal AC equivalent resistance (Rx) of each of the following circuit configurations: (a) Fig. Q7 a (b) Fig. Q7 b

Q7. Assume that the AC small signal parameters of the BJT are gm,Q1, rπ,Q1, ro,Q1, βQ1, and the AC small signal parameters of the MOSFETs are gm,Mi, gmb,Mi, ro,Mi, where i = 1, 2. Write down the expressions for the small signal AC equivalent resistance (Rx) of each of the following circuit configurations: (a) Fig. Q7 a (b) Fig. Q7 bQ7. Assume that the AC small signal parameters of the BJT are gm,Q1, rπ,Q1, ro,Q1, βQ1, and the AC small signal parameters of the MOSFETs are gm,Mi, gmb,Mi, ro,Mi, where i = 1, 2. Write down the expressions for the small signal AC equivalent resistance (Rx) of each of the following circuit configurations: (a) Fig. Q7 a (b) Fig. Q7 b

Image text
Q7. Assume that the A C small signal parameters of the BJT are g m , Q l , r π Q l , r o , Q l , β Q l , and the AC small signal parameters of the MOSFETs are g m , M i g m b , M i , r 0 , M i , where i = 1 , 2 . Write down the expressions for the small signal A C equivalent resistance ( R x ) of each of the following circuit configurations: (a) Fig. Q7a
(b) Fig. Q7b

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Consider the CMOS common source amplifier circuit in Fig. 4. The transistor parameters are given as VTN = 0.5 V, VTP = −0.5 V, kn′ = 80 μA/V2, kp′ = 40 μA/V2, and λn = λp = 0.015 V −1. Assume that IBias = 0.1 mA and M2, M3 are identical. (a) Determine the small-signal parameters (gm and ro) of each transistor. (Express the transconductance gm in terms of the width-to-length ratio (W/L) without any values). (b) Draw the small-signal equivalent circuit and derive the small-signal voltage gain equation. (c) Find the width-to-length ratio of M1 such that the small-signal voltage gain is Av = −250. (d) Derive and calculate the output resistance Ro. Figure 4. CMOS common source amplifier circuit for the Question 4
Solution
3 0

24. In Fig. 7, VDD = 3 V, (W/L)1 = (20μm/0.2μm), (W/L)2 = (W/L)3 = (W/L)4 = (10μm/0.2μm), R1 = R2 = R3 = 100 kΩ. C1 and C2 are very large, and VB1 = 2 V, VB2 = 1 V. λn = λp = 0.01/V (a) Express the small signal gain of this amplifier using the small signal parameters of MOSFETs (gm, ro) and the resistance of resistors (R1, R2, R3). (10) (b) Ignoring the channel length modulation, determine Vin so that Vx = 2.5 V. (10) (c) Determine the small signal gain of the amplifier at the value of Vin obtained in (b).(10) Figure 7 μnCox = 100 μA/V2, μpCox = 40 μA/V2, Vthn = |Vthp | = 0.5 V, λn = λp = 0
Solution
0 0

For the following problem, neglect body effect, Cgd and ro, but consider Cgs and use long-channel equations in transistors. Assume L = 0.7 μm for both transistors. The other circuit component values are the following: Rb = 4 kΩ, Rd = 50 Ω, Lg = 10 nH, Ls = 0.5 nH, RS = 50 Ω. The frequency of operation is 2.4 GHz. Ci may be considered as a short circuit at the frequency of operation. Rb is high enough that can be considered as an open circuit for small signal. (a) Symbolically, calculate the input impedance Zi. (b) Calculate the required overdrive voltage in M2 to make the real part of Zi equal to 50 Ω. (c) Calculate W2 to make Zi = 50 Ω. (d) Calculate ID and W1 to make Iref = ID/10. (e) Calculate the DC component at v0. (f) Numerically calculate the small-signal gain, av = vo/vi. (g) Calculate vo if vs = 1 mV peak. (h) Symbolically, calculate the noise figure of this amplifier. (i) Calculate F in dB. CMOS process data: VDD = 1.8 V. For NMOS, Vthn = 0.4V, μn = 400 cm2/Vs, Cox = 9 fF/μm2 and γn = 1. The parameters for PMOS transistors are k′ = μpCox = 90 μA/V2, Vthp = −0.4V and γp = 0.8.
Solution
0 0