Question

Notify Me Bookmark

Required information The outputs of two CMOS inverters are accidentally tied together, as shown in the given figure: What is the voltage at the common output node if the NMOS and PMOS transistors have W/L ratios of 20/1 and 40/1, respectively and if Kn = 2000 μA/V2, and Kp = 1600 μA/V2 ? VDSN = V (Round off the solution to three decimal places. ) VDSP = V (Round off the solution to two decimal places.)

Required information The outputs of two CMOS inverters are accidentally tied together, as shown in the given figure: What is the voltage at the common output node if the NMOS and PMOS transistors have W/L ratios of 20/1 and 40/1, respectively and if Kn = 2000 μA/V2, and Kp = 1600 μA/V2 ? VDSN = V (Round off the solution to three decimal places. ) VDSP = V (Round off the solution to two decimal places.)

Image text
Required information The outputs of two CMOS inverters are accidentally tied together, as shown in the given figure:
What is the voltage at the common output node if the NMOS and PMOS transistors have W / L ratios of 20 / 1 and 40 / 1 , respectively and if K n = 2000 μ A / V 2 , and K p = 1600 μ A / V 2 ? V D S N = .984 V (Round off the solution to three decimal places.) V D S P = 1.52 V (Round off the solution to two decimal places.)

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

The outputs of two CMOS inverters are accidentally tied together, as shown in Fig. P7.22. What is the voltage at the common output node if the NMOS and PMOS transistors have W/L ratios of 20/1 and 40/1, respectively? What is the current in the circuit?

The outputs of two CMOS inverters are accidentally tied together, as shown in Fig. P7.22. What is the voltage at the common output node if the NMOS and PMOS transistors have W/L ratios of 20/1 and 40/1, respectively? What is the current in the circuit?
Solution
1 0

The outputs of two CMOS inverters are accidentally tied together, as shown in Figure below. What is the voltage at the common output node if the left inverter has a propagation delay of 1 ns while the right inverter has a propagation delay of 2 ns ? Assume that the two inputs are applied at the same time.

Solution
0 0

For the amplifier below, following design information is provided: VDD = 3.3 V, R = 2.4 kΩ, ISS = 1.8 mA, k1 = k2 = 5 mA/V2, VTH,1 = VTH,2 = 0.5 V, λ = 0.1 V−1, γ = 0, ki′ = μ0Cox, ki = μ0 Cox(W L)i. Assume that both transistors are identical and in the saturation region. Finally, NMOS and PMOS bulk terminals are connected to the ground and VDD, respectively. a) What is the DC bias voltage for M1 and M2 given that the voltage drop across ISS is 0.4 V ? You can neglect the channel length modulation, here. Check that the transistors are in the correct operation-mode. b) The resistors will be realized using identical PMOS transistors M3 and M4. If the transistors to be used will have k3 = k4 = 1.5 mA/V2, what will be their overdrive voltages? Check that the transistors are in the correct operation-mode. c) What is the differential voltage gain AV,diff = Vout/Vid in dB ? d) ISS will be realized as a cascode current source. Assume that the voltage drop of 0.4 V is equally shared by the two transistors, M5 and M6 having k5′ = k6′ = 0.5 mA/V2 and VTH, 5 = VTH, 6 = 0.5 V. Assuming the gate voltages of both transistors are 1 V, find the W/L ratios of each device. Once again, you can neglect the channel length modulation here. e) Considering (d), how would the W/L ratios qualitatively change (increase/decrease/stays the same), if γ > 0 ? Explain your reasoning analytically, i. e. , using appropriate equations. f) Using the cascode current source, calculate the common-mode gain of the circuit AV, CM = Vout /Vin in dB, where Vin . s applied to the gates of both M1 and M2. Assume λ = 0.1 V−1 for M5 and M6. g) Calculate the CMRR of the circuit in dB.
Solution
0 0