Question

Notify Me Bookmark

Specifications: (a) VDD = 1.8 V. (b) Let |VGS| be 0.6 V for all transistors. (c) Vout = 1.5 V. (d) ID1 = ID2 = 0.1 mA. (e) Use 0.18 um CMOS parameters. Questions: (a) Determine RD2. (b) Determine Vx. (c) Determine W4/L4.

Specifications: (a) VDD = 1.8 V. (b) Let |VGS| be 0.6 V for all transistors. (c) Vout = 1.5 V. (d) ID1 = ID2 = 0.1 mA. (e) Use 0.18 um CMOS parameters. Questions: (a) Determine RD2. (b) Determine Vx. (c) Determine W4/L4.

Image text
Specifications: (a) VDD = 1.8 V. (b) Let |VGS| be 0.6 V for all transistors. (c) Vout = 1.5 V. (d) ID1 = ID2 = 0.1 mA. (e) Use 0.18 um CMOS parameters. Questions: (a) Determine RD2. (b) Determine Vx. (c) Determine W4/L4.

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)

Similar/Related Questions

Consider a CMOS inverter, with the following device parameters: nMOS VT0,n = 0.6 V unCox = 60 uA/V2 pMOS VT0,p = -0.8 V upCox = 20 uA/V2 Also: VDD = 3 V (a) Determine the (W/L) ratios of the nMOS and the PMOS transistor such that the switching threshold is Vth = 1.5 V. (b) Plot the VTC of the CMOS inverter using SPICE. (c) Determine the VTC of the inverter for lambda = 0.05 V-1 and 0.1 V-1. (d) Discuss how the noise margins are influenced by non-zero lambda, value. Note that transistors with very short channel lengths (manufactured with sub-micron design rules) tend to have larger

Solution
1 0

Design the CS stage for a voltage gain (Av = Vout/Vin) of -4, a power budget (P) of 2 mW, and a voltage drop of 200 mV across Rs. The overdrive voltage of M1 must not exceed 300 mV, and R1+R2 must consume less than 0.1 mW. Use μnCox = 200 μA/V2, VTH = 0.4 V, λ = 0, VDD = 1.8 V and. The coupling capacitors (C) are short circuits at frequencies of interest. (a) Determine Rs1, R1, R2 (b) Determine W/L (c) Determine RD (d) Verify that M1 operates in saturation. If not, why is it?
Solution
0 0

(a) Determine the switching threshold (Vth) of Inverter, 2-input NAND (NAND2), 3input NAND (NAND3), 2-input NOR (NOR2), and 3-input NOR (NOR3). Use the transistor parameters given above. (10 Marks) (b) Now, we want to make Vth of the above gates identical to Vth of Inverter. Determine the new transistor sizes of the above logic gates. (10 Marks) (c) Figure 1 is designed using the above device parameters. Determine VIH, VIL, Vth, and the noise margin of the 2-input NOR gate and the inverter using the equivalent device sizes of the best case. Assume VOH is 90% of VDD and VOL is 10% of VDD. (10 Marks) (d) Explain how to make the noise margins of the above NOR2 balanced for logic ' 0 ' and ' 1 '. (10 Marks) The parameters of the pMOS and nMOS transistors are given below: pMOS Vtp = -0.6 V upCox = 200 uA/V2 (W/L)p = 5 nMOS Vtn = 0.6 V unCox = 500 uA/V2 (W/L)n = 2 VDD = 1.5 V

Solution
7 0