Question

Notify Me Bookmark

The above circuit uses two JK Flip-Flops, each based on a D Flip-Flop as follows: (Scheme 2:) Assuming that the Q value of both JK flip-flops are ' O ' before the clock pulses for the first time (in Scheme 1), and that both flip-flops only update on the rising edge, what are the values of Q1 and Q2 when the clock has pulsed 4 times? Assume that we're checking the values of Q1 and Q2 after enough time has passed after the pulse that if they were going to update, they've updated. Q1: 1, Q2: 1 Q1: 1, Q2: 0 Q1: 0, Q2: 1 Q1: 0, Q2: 0

The above circuit uses two JK Flip-Flops, each based on a D Flip-Flop as follows: (Scheme 2:) Assuming that the Q value of both JK flip-flops are ' O ' before the clock pulses for the first time (in Scheme 1), and that both flip-flops only update on the rising edge, what are the values of Q1 and Q2 when the clock has pulsed 4 times? Assume that we're checking the values of Q1 and Q2 after enough time has passed after the pulse that if they were going to update, they've updated. Q1: 1, Q2: 1 Q1: 1, Q2: 0 Q1: 0, Q2: 1 Q1: 0, Q2: 0

Image text
The above circuit uses two JK Flip-Flops, each based on a D Flip-Flop as follows: (Scheme 2:)
Assuming that the Q value of both JK flip-flops are ' O ' before the clock pulses for the first time (in Scheme 1), and that both flip-flops only update on the rising edge, what are the values of Q1 and Q2 when the clock has pulsed 4 times?
Assume that we're checking the values of Q1 and Q2 after enough time has passed after the pulse that if they were going to update, they've updated. Q1: 1, Q2: 1 Q1: 1, Q2: 0 Q1: 0, Q2: 1 Q1: 0, Q2: 0

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Design the circuit below to obtain a dc voltage of 0 V at each of the drains of Q1 and Q2 when vG1 = vG2 = 0 V. Operate all transistors at VOV = 0.15 V and assume that for the process technology in which the circuit is fabricated, Vtn = 0.35 V and μnCox = 400 μA/V2. Ignore channel-length modulation. Determine the values of R, RD, and the W/L ratios of Q1, Q2, Q3, and Q4. What is the input common-mode voltage range for your design? Hint: The lower limit on VCM is determined by the need to keep Q3 operating in saturation and the upper limit on VCM is determined by the need to keep Q1 and Q2 in saturation.

Solution
0 0

Ornithologists have determined that some species of birds tend to avoid flights over large bodies of water during daylight hours. It is believed that more energy is required to fly over water than land because air generally rises over land and falls over water during the day. (i) A bird with these tendencies is released from an island that is 3 km from the nearest point B on a straight shoreline, flies to a point C on the shoreline, and then flies along the shoreline to its nesting area D. Points B and D are 10 km apart. Assume that the bird instinctively chooses a path that will minimize its energy expenditure. (Round your answers to two decimal places.) (a) In general, if it takes 1.2 times as much energy to fly over water as land, to what point C should the bird fly in order to minimize the total energy expended in returning to its nesting area? km from B (b) Let W and L denote the energy (in joules) per kilometer flown over water and land, respectively. Assuming the bird's energy expenditure is minimized, determine a function for the ratio WL in terms of x, the distance from B to C. W/L = (c) What should the value of W/L be in order for the bird to fly directly to its nesting area D? (d) If the ornithologists observe that birds of a certain species reach the shore at a point 2 km from B, how many times more energy does it take a bird to fly over water than land?
Solution
0 0

The NMOS transistors in the circuit of Fig. P5.50 have Vt = 0.5 V, μnCox = 250 μA/V^2, λ = 0, and L1, L2 = 0.25 μm. Find the required values of gate width for each of Q1 and Q2, and the value of R, to obtain the voltage and current values indicated.The NMOS transistors in the circuit of Fig. P5.50 have Vt = 0.5 V, μnCox = 250 μA/V^2, λ = 0, and L1, L2 = 0.25 μm. Find the required values of gate width for each of Q1 and Q2, and the value of R, to obtain the voltage and current values indicated.
Solution
2 0