Question

Notify Me Bookmark

The cascode current source shown in Fig. 9.48 must be designed for a bias current of 0.5 mA. Assume unCox = 100 uA/V2 and VTH = 0.4 V. (a) Neglecting channel-length modulation, compute the required value of Vb2. What is the minimum tolerable value of Vb1 if M2 must remain in saturation? (b) Assuming lambda = 0.1 V-1, calculate the output impedance of the circuit.

The cascode current source shown in Fig. 9.48 must be designed for a bias current of 0.5 mA. Assume unCox = 100 uA/V2 and VTH = 0.4 V. (a) Neglecting channel-length modulation, compute the required value of Vb2. What is the minimum tolerable value of Vb1 if M2 must remain in saturation? (b) Assuming lambda = 0.1 V-1, calculate the output impedance of the circuit.

Image text
The cascode current source shown in Fig. 9.48 must be designed for a bias current of 0.5 mA. Assume unCox = 100 uA/V2 and VTH = 0.4 V. (a) Neglecting channel-length modulation, compute the required value of Vb2. What is the minimum tolerable value of Vb1 if M2 must remain in saturation? (b) Assuming lambda = 0.1 V-1, calculate the output impedance of the circuit.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

The cascade current source shown below must be designed for a bias current of 1 mA. Assume unCox = 100 uA/V2 and VTH = 0.4V. (a) Neglecting channel-length modulation, compute the required value of Vb2. What is the minimum tolerable value of Vb1 if M2 must remain in saturation? (b) Assuming lambda = 0.1 V-1, calculate the output impedance of the circuit. Show all your work along with the small-signal equivalent circuit.
Solution
0 0

The cascode current source shown below must be designed for a bias current of 0.5 mA. Assume Kn = 5 mA/V2 and Vth = 0.4 V for both M1 and M2. (a) Neglecting channel-length modulation, compute the required value of Vb2. What is the minimum tolerable value of Vb1 if M2 must remain in saturation? (b) Assuming lambda = 0.1 V-1, calculate the output impedance of the circuit.
Solution
1 0

Consider MOSFET-based current source circuits shown below. Assume that the n-type MOSFET transistors follow the long-channel model with μnCox = 100 μA/V2 and Vth,n = 0.5 V. All the transistors have a fixed channel length L = 0.25 μm. The bias voltage VB1 is at 0.8 V. Assume that all transistors have no back-bias effect. (1) (2) (a) For a basic current source in Fig. (1), size the NMOS transistor M1's width ( = W1) so that it conducts a current of 1 mA when it operates in saturation region. You may assume λn = 0. (b) What is the minimum value of Vout for this circuit that keeps M1 in saturation region? (c) For a cascode current source in Fig. (2), assume that the transistor M2 has the same width with M1 you determined from part (a). Determine the value of VB2 that yields the lowest minimum VOUT keeping both M1 and M2 in saturation regions. (d) Now, let's assume that the transistors M1 and M2 have a finite output resistance with λn = 0.1 V−1. Compute the value of the output resistance (Rout) of this cascode current source when M1 and M2 are in the saturation region. (Hint: Calculate the output impedance in a small signal equivalent circuit.)
Solution
0 0