Question

Notify Me Bookmark

The circuit shown in Fig. P4.1-2 illustrates a single-channel MOS resistor with a W/L of 2 µm/1 µm. Using Table 3.1-2 model parameters, calculate the small-signal ON resistance of the MOS transistor at various values for VS and fill in the table below. VS (volts) R (ohms) 1.0 3.0 5.0

The circuit shown in Fig. P4.1-2 illustrates a single-channel MOS resistor with a W/L of 2 µm/1 µm. Using Table 3.1-2 model parameters, calculate the small-signal ON resistance of the MOS transistor at various values for VS and fill in the table below. VS (volts) R (ohms) 1.0 3.0 5.0

Image text
The circuit shown in Fig. P4.1-2 illustrates a single-channel MOS resistor with a W/L of 2 µm/1 µm. Using Table 3.1-2 model parameters, calculate the small-signal ON resistance of the MOS transistor at various values for VS and fill in the table below. VS (volts) R (ohms) 1.0 3.0 5.0

Detailed Answer

3 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (3)
  • Correct answers (3)
  • Complete solution (3)
  • Step-by-step solution (3)
  • Fully explained (3)

Similar/Related Questions

The circuit shown in Fig. P4.1-3 illustrates a single-channel MOS resistor with a W/L of 4 mm/1 mm. Using Table 3.1-2 model parameters, calculate the small-signal ON resistance of the MOS transistor at various values for VS and fill in the table below. Note that the most positive supply voltage is 5 V. VS (volts) R (ohms) 1.0 3.0 5.0
Solution
3 0

A NMOS cascode amplifier with active load is shown in Fig. P3.23. It is realized using the 0.35-µm CMOS devices in Table 1.5 with VDD = 3.3 V, Ibias = 100 µA, (W/L)1,2,5,6 = 10 µm/0.5 µm, and (W/L)3,4 = 30 µm/0.5 µm. a. Estimate the small-signal gain, vo/vi , and output resistance. b. What is the total power consumption of the circuit? c. Estimate the range of output voltages over which all transistors will remain in active mode. Modify the design of Problem 3.23 in order to double its small-signal gain without changing its power consumption Fig. P3.23

A NMOS cascode amplifier with active load is shown in Fig. P3.23. It is realized using the 0.35-µm CMOS devices in Table 1.5 with VDD = 3.3 V, Ibias = 100 µA, (W/L)1,2,5,6 = 10 µm/0.5 µm, and (W/L)3,4 = 30 µm/0.5 µm. a. Estimate the small-signal gain, vo/vi , and output resistance. b. What is the total power consumption of the circuit? c. Estimate the range of output voltages over which all transistors will remain in active mode. Modify the design of Problem 3.23 in order to double its small-signal gain without changing its power consumption Fig. P3.23
Solution
0 0

In this amplifier circuit, the high and low DC voltage sources are: VDD = 5 V and VSS = −5 V respectively. Consider that all three external capacitors have high values. The PMOS transistor has a threshold voltage equal to Vt = −1 V and kp = kp′(W/L) = 0.4 mA/V2, and the NMOS transistor has a threshold voltage Vt = 1 V and a kn = kn′(W/L) = 2 mA/V2. It was shown in HW#7 that the DC drain voltage of the PMOS transistor is −0.2 V and the DC source of the NMOS transistor is −2 V. a) Perform the small signal analysis of this circuit and determine the voltage gain: AV = Vo/Vi b) Determine the input and output resistance of this amplifier Rin and Rout . c) Discuss what is the purpose of the part of the circuit between CC2 and CC3 which includes the NMOS transistor in this amplifier design. d) Determine the parameters of a simple voltage amplifier model (discussed in chapter 1) which will represent this amplifier. Note that the parameters of the simple voltage amplifier excludes any series resistance of the external source ( Vi ) (in this case it is zero anyway) and the load resistance (in this case RL = 2 kΩ ). e) Using the simple model from part (c) determine the voltage gain AV = Vo/Vi and see if it agrees with the answer of part (a). VDD
Solution
0 0