Question

Notify Me Bookmark

The following circuit is improper (non-complementary) cMOS. Which of the following input combinations (a) ABC = 000 (b) ABC = 110 (c) ABC = 101 (d) ABC = 011 (e) ABC = 111

The following circuit is improper (non-complementary) cMOS. Which of the following input combinations (a) ABC = 000 (b) ABC = 110 (c) ABC = 101 (d) ABC = 011 (e) ABC = 111

Image text
The following circuit is improper (non-complementary) cMOS. Which of the following input combinations (a) A B C = 000 (b) A B C = 110 (c) A B C = 101 (d) A B C = 011 (e) A B C = 111

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Comparison of static CMOS and Φ-N/Φ-P network dynamic logic: Implement the following logic function Y = A + B ∙ C with 3 different logic architectures: static CMOS, Φ-N network dynamic logic, Φ-P network dynamic logic. 1). Plot the schematic design of your circuit implementation for the 3 architectures respectively. 2). Assume Vdd = 5 V, Gnd = 0 V, clock period TΦ = 100 ns. For the given input pattern sequence ABC = P1 → P2 → P3 → P4, where P1, P2, P3 and P4 are 3-bit binary codes of the last 4 digits of your student ID. For example, if your student ID is: 1234567, then P1 = "4" = 100, P2 = "5" = 101, P3 = "6" = 110, P4 = "7" = 111. For digit "8 ", use ABC = 000; for digit " 9", use ABC = 001. For above four input patterns, roughly sketch the output waveform of inputs and VY for 3 different architecture designs in Figure 3. How are they different from each other? 3). Fill the table 1 for the values of output voltage VY for the given input pattern sequence.
Solution
0 0

The following circuit diagram shows the use of two such MOS transistors for the implementation of a fundamental logic gate in digital ICs. Both MOS transistors (M1 & M2) have the same threshold voltage VT = 0.5 V and µCox = 10-4 A/V2. Fig. 2.1 (a). What are the operation modes of the MOS transistors (MI&M2) when the input is a logic “low” signal (i.e. Vin = 0 V )? (b). Find out the expression of the current flowing through the MOS transistor M2 as a function of the output voltage Vout. Then determine the current when Vout = 1.5 V. (c). Using results in (a) and (b) as a hint, hence or otherwise, determine VOH (i.e. the maximum output voltage when the output is a logic “high” signal). (d). Based on the results in (b) and (c), hence or otherwise, describe two advantages of digital circuits with CMOS implementation compared with the implementation in Fig. 2.1. (e). Draw a schematic circuit diagram of the CMOS implementation of the logic circuit in Fig. 2.1. You must use standard circuit symbols and show the signal interconnections clearly with proper labels.
Solution
0 0

NMOS devices of a 2-input NOR gate are to be sized for TPHL = 30ps and CL = 20fF. Which of the following is the best estimate of their drawn width? (a) WDR(N) = 325 nm. (b) WDR(N) = 200 nm. (c) WDR(N) = 2.00 µm. (d) WDR(N) = 112 nm. (e) WDR(N) = 1.22 µm. (f) WDR(N) = 590 nm.
Solution
0 0