Question

Notify Me Bookmark

The following circuit uses an ideal Op-Amp. Assuming that vin = 6.6 mV, R1 = 9 kΩ, R2 = R4 = 26 kΩ, and R3 = 8 kΩ Find the current i4 in micro Amps

The following circuit uses an ideal Op-Amp. Assuming that vin = 6.6 mV, R1 = 9 kΩ, R2 = R4 = 26 kΩ, and R3 = 8 kΩ Find the current i4 in micro Amps

Image text
The following circuit uses an ideal Op-Amp. Assuming that v in = 6.6 mV , R 1 = 9 k Ω , R 2 = R 4 = 26 k Ω , and R 3 = 8 k Ω Find the current i 4 in micro Amps

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

For the following circuit, use Rs = 100 Ω, C1 = 10 μF, R1 = 1 KΩ, R2 = 220 KΩ, R3 = 1.5 kΩ, RL = 500 Ω, VCC = + 15 V, −VEE = −15 V, and β = 100. a. Confirm that the circuit is in the active mode b. Draw the small signal model of the circuit c. Find the amplifier's ac gain (vout/vin with source and load removed) d. Find the small signal input resistance (with the load attached) e. Find the small signal output resistance (with the source attached) f. Sketch the simplified model for the amplifier g. Find the voltage gain of the circuit (with the source and load attached) h. Find the current gain of the circuit (with the source and load attached)
Solution
0 0

b) The circuit shown in Figure 3-1 is used in the design of a high frequency oscillator. Assume that all components are ideal and that R1 = R2 = 10 Ω, R3 = R4 = 10 kΩ, C = 10 nF and L = 1 μH. Figure 3-1. Oscillator circuit i) Using the Barkhausen criteria show that this circuit will function as an oscillator. ii) Determine the oscillation frequency.
Solution
0 0

Figure 3 Figure 3 shows an amplifier with a current mirror as an active load. The MOSFETs have the following parameters: Vtn = −Vt = 0.6 V, kn′ = 200 μA/V2, kp′ = 65 μA/V2, VA(MMOS) = 20 V, VA(PMOS) = −10 V, VT = 26 mV, R1 = 7 kΩ, R2 = 10 kΩ, L = 0.4 μm and W = 4 μm. The base-emitter forward voltage, VBE, of transistor Q4 is 0.7 V. The forward voltage drop for both D1 and D2 is 0.7 V. The supply voltage, VDO = 3 V. Assume the base current of Q4 is negligible compared to the emitter and collector currents of Q4, with all the transistors biased in the active region. a. ) Given that ID = k′(WL)(VGS − Vt)2, calculate the gate to source voltage of Q1. b. ) Calculate the small-signal voltage gain, vout/vin. .

Solution
0 0