Question

Notify Me Bookmark

The following figure shows a voltage amplifier having an input resistance Ri, an input capacitance Ci, a gain factor μ, and an output resistance R0. The amplifier is fed with a voltage source Vsig having a source resistance Rsig, and a load of resistance RL is connected to the output. Assuming Rsig = 20 kΩ, Ri = 100 kΩ, μ = 144 V/V, RO = 200 Ω, RL = 1 kΩ, and the capacitor Ci = 340 pF. Find the magnitude of the total transfer function |T(ω)| = |Vout (ω)/Vsig (ω)|, where ω = 2π124×103 rad/sec. Express your answer in dB

The following figure shows a voltage amplifier having an input resistance Ri, an input capacitance Ci, a gain factor μ, and an output resistance R0. The amplifier is fed with a voltage source Vsig having a source resistance Rsig, and a load of resistance RL is connected to the output. Assuming Rsig = 20 kΩ, Ri = 100 kΩ, μ = 144 V/V, RO = 200 Ω, RL = 1 kΩ, and the capacitor Ci = 340 pF. Find the magnitude of the total transfer function |T(ω)| = |Vout (ω)/Vsig (ω)|, where ω = 2π124×103 rad/sec. Express your answer in dB

Image text
The following figure shows a voltage amplifier having an input resistance Ri, an input capacitance Ci, a gain factor μ, and an output resistance R0. The amplifier is fed with a voltage source Vsig having a source resistance Rsig, and a load of resistance RL is connected to the output. Assuming Rsig = 20 kΩ, Ri = 100 kΩ, μ = 144 V/V, RO = 200 Ω, RL = 1 kΩ, and the capacitor Ci = 340 pF. Find the magnitude of the total transfer function |T(ω)| = |Vout (ω)/Vsig (ω)|, where ω = 2π124×103 rad/sec. Express your answer in dB

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Question 1 Given the following amplifier circuit with a signal source consisting of internal resistance Rs = 200 kΩ and the amplifier having an input resistor Ri = 15 kΩ, the open loop gain of 950 V/V, and the output resistor Ro = 1.5 kΩ. The output of the amplifier is connected to a load RL = 100 Ω. a) What is the overall voltage gain when measuring between the source internal voltage and the load? b) What is the overall gain if we remove the amplifier to connect the load to the source directly? c) Give your comments on the efficiency of the amplifier circuit. What is the optimal design of the amplifier circuit and explain the reason?

Solution
0 0

An NMOS amplifier is shown in Figure 1. Transistor M1 is biased in the saturation region for an amplifier application. The circuit is biased with a resistive voltage divider consisting of R1 and R2, a source degeneration resistor RS, and a load resistor RD. The drain bias current for the design is ID = 500 μA and VDS is 1.625 V. The device parameters are: L = 0.5 μm, W = 10 μm, kn’ = 200 μA/V2, Vtn = 0.5 V, and λn = 0. analyze the frequency response of the amplifier. a) Draw a midband small signal ac equivalent circuit model for the amplifier. For midband you can assume the reactance of Cin is sufficiently low that it is a short circuit. b) Derive an expression for the midband voltage gain transfer function Vout /Vsig. The amplified output signal is taken from the drain terminal and Vout = Vd. Write your gain function in terms of variables only. c) Evaluate the midband gain and calculate a value both in V/V and dB. d) Analyze the frequency response of the input network including the capacitor Cin. Find an expression for the transfer function H1(jω) = Vg/Vsig. e) Evaluate H1(jω) = Vg/Vsig and make a Bode plot of the magnitude of H1(jω). The x-axis is ω (log scale) and the y-axis is the magnitude in dB. f) Use the LTSPICE circuit template and verify the frequency response of the amplifier circuit. Include a copy of the schematic and the frequency response plot. Use 20 points per decade and a frequency span of 0.1 Hz to 100 Hz.
Solution
0 0

In the given common-base amplifier circuit below, the voltage source VB is a constant voltage source that, along with the DC component of the input voltage, sets the quiescent collector current of the PNP transistor at 1 mA. The transistor has β = 150, ro → ∞, Cπ = 10pF, and Cµ = 2pF. The amplifier is fed with an input source having Rin = 5kΩ and has a load resistance RL = 20kΩ. Ignore the capacitance CL and use VT = 25mV. Derive the transfer function and answer the questions below. What is the DC gain? dB What is the frequency of the dominant pole? ωp1 = M rad/sec What is the frequency of the non-dominant pole? ωp2 = G rad/sec
Solution
0 0