Question

Notify Me Bookmark

The LED in Figure shown requires 30 mA to emit a sufficient level of light. For the following circuit values, determine Rc and the amplitude of the square wave input voltage necessary to make sure that the transistor is in Saturation? [Vcc = 9 V, VCE(sat) = 0.2 V, RB = 3.3 kΩ, βDC = 50, and VLED = 1.8 V]

The LED in Figure shown requires 30 mA to emit a sufficient level of light. For the following circuit values, determine Rc and the amplitude of the square wave input voltage necessary to make sure that the transistor is in Saturation? [Vcc = 9 V, VCE(sat) = 0.2 V, RB = 3.3 kΩ, βDC = 50, and VLED = 1.8 V]

Image text
The LED in Figure shown requires 30 m A to emit a sufficient level of light. For the following circuit values, determine Rc and the amplitude of the square wave input voltage necessary to make sure that the transistor is in Saturation? [Vcc= 9 V , V C E ( sat) = 0.2 V , R B = 3.3 k Ω , β D C = 50 , and V L E D = 1.8 V ]

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Ex 4.2: For the circuit shown in Figure 4.1, VDD = 3.3 V and RD = 10 kΩ. The transistor parameters are VTN = 0.4 V, kn′ = 100 μA/V2, W/L = 50, and λ = 0.025 V−1. Assume the transistor is biased such that IDQ = 0.25 mA. (a) Verify that the transistor is biased in the saturation region. (b) Determine the small-signal parameters gm and ro. (c) Determine the small-signal voltage gain. (Ans. (a) VGSQ = 0.716 V and VDSQ = 0.8 V so that VDS > VDS (sat); (b) gm = 1.58 mA/V, ro = 160 kΩ; (c) -14.9) Figure 4.1 NMOS common-source circuit with time-varying signal source in series with gate dc source

Ex 4.2: For the circuit shown in Figure 4.1, VDD = 3.3 V and RD = 10 kΩ. The transistor parameters are VTN = 0.4 V, kn′ = 100 μA/V2, W/L = 50, and λ = 0.025 V−1. Assume the transistor is biased such that IDQ = 0.25 mA. (a) Verify that the transistor is biased in the saturation region. (b) Determine the small-signal parameters gm and ro. (c) Determine the small-signal voltage gain. (Ans. (a) VGSQ = 0.716 V and VDSQ = 0.8 V so that VDS > VDS (sat); (b) gm = 1.58 mA/V, ro = 160 kΩ; (c) -14.9) Figure 4.1 NMOS common-source circuit with time-varying signal source in series with gate dc source
Solution
0 0

In Figure Q3, a voltage divider biased network for a CE amplifier circuit is shown. The transistor parameters are VBE(on) = 0.7 V, VCE(sat) = 0.2 V, β = 100, and VA = ∞. Figure Q3: CE Amplifier Bias Network (a) What is the advantage of emitter resistor RE ? (b) If VE is maintained at 1 V at the Q-point, estimate the maximum possible swing at the output terminal (vO). Justify your reasons. Determine a suitable DC value for collector voltage to be able to achieve the maximum swing. (c) What are VCEQ and ICQ ? (d) Determine values for R1 and R2. (e) A student has implemented this circuit on a breadboard to test the Q-point before applying AC input signal vI. Measurement results show that the collector voltage is equal to 25 V even though the values of R1, R2, and RE appear to be correct. What could be the reason(s) for this unexpected result? Explain where and what you would check in the circuit.

Solution
0 0

For the BJT transistor circuit given in the Figure 3 below, Vcc = +10 V and the transistor's AC current gain, hFE = 250. Figure 3: BJT switching circuit a. Calculate the values of RB and RC that will ensure that the transistor operates efficiently as a switch for the input waveform Vin as shown above (use E12 resistor value). Sketch the output waveform that will result from the given input waveform. Use transistor DC gain, βDC = 250. [20 marks] b. Calculate the Q-point if a constant value of input voltage, Vin = 3 V is applied at the input. Determine if this design is feasible and, if it is not, suggest a solution to fix it? [10 marks]

Solution
0 0