Question

Notify Me Bookmark

The minimum value of small-signal resistance of a PMOS transistor is to be ro = 100 kΩ. If λ = 0.012 V-1, calculate the maximum allowed value of ID.

The minimum value of small-signal resistance of a PMOS transistor is to be ro = 100 kΩ. If λ = 0.012 V-1, calculate the maximum allowed value of ID.

Image text
The minimum value of small-signal resistance of a PMOS transistor is to be ro = 100 kΩ. If λ = 0.012 V-1, calculate the maximum allowed value of ID.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

a) A square wave oscillator is to be build using 555 timer IC. The value of R1 = 8.6 kΩ (the upper resistor between Pin7 and Pin8) while the value of R2 = 1 kΩ (the lower resistor between Pin6 and Pin7). A 10 kΩ-potentiometer is connected in series with R2. The value of C = 1000 pF. Calculate the minimum and maximum frequency and minimum and maximum duty cycle. Show how you will modify the circuit design for a 50% duty cycle. b) For the following circuit, calculate the internal drain-source resistance of the JFET and the output frequency. Given that: R1 = R2 = 15 kΩ, R4 = 1.5 kΩ. Describe the rule of the transistor in this circuit.
Solution
0 0

[Small Signal Analysis] Consider the following amplifier circuit consisting of an N-type MOSFET, λ = 0 and vSB = 0. RG = 100kΩ, RD = 3kΩ, RS = 1kΩ, CC and CS are both so large that 1/(jωC) ∼ 0 at the frequency of interest. VDD = 1.0v. The MOSFET has kn = 0.8 mA/V2 and Vt = 0.4v. (a) Analyze the DC bias point of this circuit. What are the DC values of VOUT and VS , respectively? (b) Calculate gm for the MOSFET. (c) What is the maximum allowed value of RD so that the MOS transistor remains in saturation mode? (d) Draw the small signal equivalent circuit for this amplifier. (e) What is the small signal gain Av? (f) What is the input resistance Rin?
Solution
0 0

QUESTION 2: A class-A emitter follower biased with a constant current source is shown below. Assume circuit parameters of V+ = 15 V, V− = −15 V, and RL = 51 Ω. The transistor parameters are β = 47 and VBE(on) = 0.71 V. The minimum current in Q1 is to be iE1(min) = 0.079 A and the minimum collector-emitter voltage is to be vCE(min) = 0.65 V. Determine the value of R that will produce the maximum possible output voltage swing. What is the value of IQ ? What are the maximum and minimum values of iE1 ? Then calculate η, the power conversion efficiency.
Solution
0 0