Question

Notify Me Bookmark

The n-channel MOSFETs in the following circuits exhibits a threshold voltage Vt = 1V and unCox(W/L) = 2mA/V^2. The p-channel MOSFETs have threshold voltage Vt = -1V and upCox(W/L) = 1mA/V^2. Assume R1 = R2 = Rsig = 10kohm. Find: 1. The voltage gain Ava = v2 /v1 and input resistance Ria for circuit (a). 2. The voltage gain Avb = v4 /v3 and output resistance Rob for circuit (b). 3. The overall voltage gain Av = v4 /vsig that should be obtain if va is connected to v1 and v2 is connected to v3.

The n-channel MOSFETs in the following circuits exhibits a threshold voltage Vt = 1V and unCox(W/L) = 2mA/V^2. The p-channel MOSFETs have threshold voltage Vt = -1V and upCox(W/L) = 1mA/V^2. Assume R1 = R2 = Rsig = 10kohm. Find: 1. The voltage gain Ava = v2 /v1 and input resistance Ria for circuit (a). 2. The voltage gain Avb = v4 /v3 and output resistance Rob for circuit (b). 3. The overall voltage gain Av = v4 /vsig that should be obtain if va is connected to v1 and v2 is connected to v3.

Image text
The n-channel MOSFETs in the following circuits exhibits a threshold voltage Vt = 1V and unCox(W/L) = 2mA/V^2. The p-channel MOSFETs have threshold voltage Vt = -1V and upCox(W/L) = 1mA/V^2. Assume R1 = R2 = Rsig = 10kohm. Find: 1. The voltage gain Ava = v2 /v1 and input resistance Ria for circuit (a). 2. The voltage gain Avb = v4 /v3 and output resistance Rob for circuit (b). 3. The overall voltage gain Av = v4 /vsig that should be obtain if va is connected to v1 and v2 is connected to v3.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

Assume that MOSFET in the common-source amplifier shown below is properly DC bias to operate in saturation region and that it has the following properties: Vt = 0.5 V, kn= 1 mA/V2, VA = 300 V. (a) (40%) Perform DC analysis to find ID and Vov. (b) (10%) Calculate the small-signal parameters and ro. (c) (10%) Draw the small-signal equivalent circuit of the amplifier. (d) (20%) Find the amplifier voltage gain Av = vo/vi (e) (10%) Find the overall voltage gain Gv = vo/vsig. (f) (10%) Find input (Rin ) and output (Rout) resistances.
Solution
0 0

In this amplifier circuit, the high and low DC voltage sources are: VDD = 5 V and VSS = −5 V respectively. Consider that all three external capacitors have high values. The PMOS transistor has a threshold voltage equal to Vt = −1 V and kp = kp′(W/L) = 0.4 mA/V2, and the NMOS transistor has a threshold voltage Vt = 1 V and a kn = kn′(W/L) = 2 mA/V2. It was shown in HW#7 that the DC drain voltage of the PMOS transistor is −0.2 V and the DC source of the NMOS transistor is −2 V. a) Perform the small signal analysis of this circuit and determine the voltage gain: AV = Vo/Vi b) Determine the input and output resistance of this amplifier Rin and Rout . c) Discuss what is the purpose of the part of the circuit between CC2 and CC3 which includes the NMOS transistor in this amplifier design. d) Determine the parameters of a simple voltage amplifier model (discussed in chapter 1) which will represent this amplifier. Note that the parameters of the simple voltage amplifier excludes any series resistance of the external source ( Vi ) (in this case it is zero anyway) and the load resistance (in this case RL = 2 kΩ ). e) Using the simple model from part (c) determine the voltage gain AV = Vo/Vi and see if it agrees with the answer of part (a). VDD
Solution
0 0

In the circuit below, the supply voltage is VDD = 3.3 V, R1 = 120 kΩ, R2 = 60 kΩ, R3 = 30 kΩ, R4 = 10kΩ, CX = CY = CZ = ∞F, and the NMOS transistor has a transconductance parameter k = 4 mA/V2, a threshold voltage Vt = 0.5 V, and a channel-length modulation coefficient λ = 0.5 V-1 . (a) Without including the channel-length modulation, calculate the transistor dc voltages and currents, VG, VS, VD, and ID, and verify the transistor region of operation. (b) Calculate the small-signal transconductance gm and drain-to source resistance ro, sketch the small-signal equivalent circuit, find the small signal midband voltage gain vy/vx, when vx is connected to an ideal voltage source, vy is open-circuited and vz is grounded, and find the small-signal midband voltage gain vz/vx, when vx is connected to an ideal voltage source, vy is grounded and vz is open-circuited.
Solution
0 0