Question

Notify Me Bookmark

The NMOS transistor in Fig. 1 has W/L = 1.08 um/ 0.18 um, resistor RD = 5 kohm, supply voltage VDD = 1.8 V, and the gate voltage, VG1 = 0.8 V. Solve the drain current ID and voltage Vout . Verify the region of operation of the transistor.

The NMOS transistor in Fig. 1 has W/L = 1.08 um/ 0.18 um, resistor RD = 5 kohm, supply voltage VDD = 1.8 V, and the gate voltage, VG1 = 0.8 V. Solve the drain current ID and voltage Vout . Verify the region of operation of the transistor.

Image text
The NMOS transistor in Fig. 1 has W/L = 1.08 um/ 0.18 um, resistor RD = 5 kohm, supply voltage VDD = 1.8 V, and the gate voltage, VG1 = 0.8 V. Solve the drain current ID and voltage Vout . Verify the region of operation of the transistor.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

Assuming (W/L)1 = 2 μm/0.18 μm and (W/L)1 = 5 μm/0.18 μm, find the voltage transfer characteristic of the inverter in Fig. 1. Compute the voltage expressions for every operating region of the transistors and find the drain currents of M1 and M2 for Vin = VDD/2. Comment on possible improvements to reduce this current. Figure 1 For the transistors in this question, assume VDD = 1.8 V, μnCox = 100 μAV−1, μpCox = 50 μAV−1, Vthn = 0.4 V, Vthp = −0.5 V, λn = λp = 0.

Solution
0 0

A common-source amplifier is shown below. The MOSFET parameters are k'n = 2mA/V2, VT = 0.8 V. The amplifier is biased with a source VDD = 5 V, and resistors RD = 4 kohm, RS = 1 kohm, RG1 = 225 kohm, RG2 = 175 kohm, Vov = 0.75 V (a) Calculate the drain current ID. Recall the formula for a MOSFET in saturation: ID = 1/2k'n(VGS - VT)2 (b) Obtain the MOSFET voltage vDS. (c) Using small-signal analysis, obtain the voltage gain vo/vi for RL = 12 kohm. Assume ro = 100 kohm, gm = 1 mA/V.

Solution
1 0

Calculate the differential-mode voltage gain, common-mode voltage gain, and common-mode rejection ratio (CMRR) of the fully-differential amplifier shown in Fig. 2. For CMRR calculation, neglect the mismatch in the two RB resistors but consider a relative mismatch of 5% between the two RD resistors. Assume the below values in calculations and neglect channel length modulation and body effect. VDD = 1.8 V, RB = 500 ohm, RS = 200 ohm, RD = 1.5 kohm, RL =5 kohm, unCox = 180 uA/V2, W = 20 um, L = 0.18 um, Vt = 0.6 V, ID = 450 uA. Fig. 2. Fully-differential common-source amplifier with source degeneration and resistive loads.
Solution
2 0