Question

Notify Me Bookmark

The NMOS transistor in the circuit below has (1/2)kn’(W/L) = 100 mA/V2, and Vt = 1V. The PMOS transistor has (1/2)kp’(W/L) = 100 mA/V2, and Vi = -1 V. Find VD, VG, VS, and ID for each transistor.

The NMOS transistor in the circuit below has (1/2)kn’(W/L) = 100 mA/V2, and Vt = 1V. The PMOS transistor has (1/2)kp’(W/L) = 100 mA/V2, and Vi = -1 V. Find VD, VG, VS, and ID for each transistor.

Image text
The NMOS transistor in the circuit below has (1/2)kn’(W/L) = 100 mA/V2, and Vt = 1V. The PMOS transistor has (1/2)kp’(W/L) = 100 mA/V2, and Vi = -1 V. Find VD, VG, VS, and ID for each transistor.

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)
  • Correct answers (1)
  • Complete solution (1)
  • Step-by-step solution (1)
  • Fully explained (1)

Similar/Related Questions

Problem #1 The PMOS in the circuit below have kp′ = 0.05 mA/V2, and Vt = -1.5 V. The NMOS has kn′ = 0.08 mA/V2, and Vt = +1.5 V. Find the drain current ID and three terminal voltages (VG, VD, VS) for every transistor.
Solution
0 0

The MOSFETs in the circuit below have (1/2)kn’(W/L) = (1/2)kp’(W/L) = 12 mA/V2, Vt = 1.2 V for the NMOS, and Vt = -1.3 V for the PMOS. (a) With no load connected to the output, fill in the truth table below. (b) Assume A = B = C = 5 V (all inputs high), and the output has a 3 Kohm resistive load connected as a pull up resistor from VOUT to 5 V. Find the deviation of the output voltage from its ideal value of 0 V. (c) Assume A = B = C = 0 V (all inputs low), and the output has a 3 Kohm resistive load connected as a pull down resistor from VOUT to 5 V. Find the deviation of the output voltage from its ideal value of 5 V.
Solution
1 0

In the circuit below, the supply voltage is VDD = 3.3 V, R1 = 120 kΩ, R2 = 60 kΩ, R3 = 30 kΩ, R4 = 10kΩ, CX = CY = CZ = ∞F, and the NMOS transistor has a transconductance parameter k = 4 mA/V2, a threshold voltage Vt = 0.5 V, and a channel-length modulation coefficient λ = 0.5 V-1 . (a) Without including the channel-length modulation, calculate the transistor dc voltages and currents, VG, VS, VD, and ID, and verify the transistor region of operation. (b) Calculate the small-signal transconductance gm and drain-to source resistance ro, sketch the small-signal equivalent circuit, find the small signal midband voltage gain vy/vx, when vx is connected to an ideal voltage source, vy is open-circuited and vz is grounded, and find the small-signal midband voltage gain vz/vx, when vx is connected to an ideal voltage source, vy is grounded and vz is open-circuited.
Solution
0 0