Question

Notify Me Bookmark

The NMOS transistor in the circuit of Fig. P5.44 has Vt = 0.4 V and kn = 4 mA/V2. The voltages at the source and the drain are measured and found to be -0.6 V and +0.2 V, respectively. What current ID is flowing, and what must the values of RD and RS be? What is the largest value for RD for which ID remains unchanged from the value found?

The NMOS transistor in the circuit of Fig. P5.44 has Vt = 0.4 V and kn = 4 mA/V2. The voltages at the source and the drain are measured and found to be -0.6 V and +0.2 V, respectively. What current ID is flowing, and what must the values of RD and RS be? What is the largest value for RD for which ID remains unchanged from the value found?

Image text
The NMOS transistor in the circuit of Fig. P5.44 has Vt = 0.4 V and kn = 4 mA/V2. The voltages at the source and the drain are measured and found to be -0.6 V and +0.2 V, respectively. What current ID is flowing, and what must the values of RD and RS be? What is the largest value for RD for which ID remains unchanged from the value found?

Detailed Answer

2 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (2)

Similar/Related Questions

The NMOS transistor in the following circuit has Vt = 0.4 V and kn = 4 mA/V2. The voltage at the source and the drain are measured and found to be -0.55 V and +0.1 V respectively. What current ID is flowing, and what must the values of RD and RS be? What is the largest value for RD for which ID remains unchanged?
Solution
1 0

Consider the circuit shown below. a) what are the required values for RS and RD to establish a drain current of 0.1 mA and a drain voltage of +0.4 V. The MOSFET has Vt = 0.5 V, μnCox = 300 μA/V2, L = 0.4 μm, and W = 5 μm. (8 marks for each parameter) b) If Vt = 0.3 V and kn = 5 mA/V2. The voltages at the source and the drain are measured and found to be −0.6 V and +0.2 V, respectively. What current ID is flowing ( 8 marks), and what must the values of RD and RS be? ( 8 marks for each parameter) What is the largest value for RD for which ID remains unchanged from the value found? ( 10 marks)

Solution
0 0

D *7.121 The MOSFET in the circuit of Fig. P7.121 has Vt = 0.8 V, kn = 5 mA/V2, and VA = 40 V. (a) Find the values of RS, RD, and RG so that ID = 0.4 mA, the largest possible value for RD is used while a maximum signal swing at the drain of ±0.8 V is possible, and the input resistance at the gate is 10 MΩ. Neglect the Early effect. (b) Find the values of gm and ro at the bias point. (c) If terminal Z is grounded, terminal X is connected to a signal source having a resistance of 1 MΩ, and terminal Y is connected to a load resistance of 10 kΩ, find the voltage gain from signal source to load. (d) If terminal Y is grounded, find the voltage gain from X to Z with Z open-circuited. What is the output resistance of the source follower? Figure P7.121 (e) If terminal X is grounded and terminal Z is connected to a current source delivering a signal current of 50 μA and having a resistance of 100 kΩ, find the voltage signal that can be measured at Y. For simplicity, neglect the effect of ro.D *7.121 The MOSFET in the circuit of Fig. P7.121 has Vt = 0.8 V, kn = 5 mA/V2, and VA = 40 V. (a) Find the values of RS, RD, and RG so that ID = 0.4 mA, the largest possible value for RD is used while a maximum signal swing at the drain of ±0.8 V is possible, and the input resistance at the gate is 10 MΩ. Neglect the Early effect. (b) Find the values of gm and ro at the bias point. (c) If terminal Z is grounded, terminal X is connected to a signal source having a resistance of 1 MΩ, and terminal Y is connected to a load resistance of 10 kΩ, find the voltage gain from signal source to load. (d) If terminal Y is grounded, find the voltage gain from X to Z with Z open-circuited. What is the output resistance of the source follower? Figure P7.121 (e) If terminal X is grounded and terminal Z is connected to a current source delivering a signal current of 50 μA and having a resistance of 100 kΩ, find the voltage signal that can be measured at Y. For simplicity, neglect the effect of ro.
Solution
3 0