Question

Notify Me Bookmark

The op amp used in the above circuit is considered to be an ideal device. Choose the correct output waveform for the circuit, given the input waveform shown.

The op amp used in the above circuit is considered to be an ideal device. Choose the correct output waveform for the circuit, given the input waveform shown.

Image text
The op amp used in the above circuit is considered to be an ideal device. Choose the correct output waveform for the circuit, given the input waveform shown.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

In the circuit shown in the figure, vi is a triangular wave. Find the largest peak output amplitude, VO, that can be used if the output waveform is to be an undistorted triangular wave of ±VO volts as shown. 14 V 12 V 5 V 15 V 10 V Op-amp Parameters: ft = 3 MHz SR = 5 V/µs Vo max = ±14 V io max = ±15 mA
Solution
2 0

Measurement of a circuit incorporating what is thought to be an ideal op amp shows the voltage at the op-amp output to be -2.000 V and that at the negative input to be -1.000 V. For the amplifier to be ideal, what would you expect the voltage at the positive input to be? If the measured voltage at the positive input is -1.005 V, what is likely to be the actual gain of the amplifier?
Solution
0 0

A transistor schematic diagram of a digital circuit is shown below (Fig. 3.1). The sizes of the MOS transistors are given as ratio (W/L)n = 4 and (W/L)p = 2. |It is also given that |VTn| = VTp = 0.5 V and µnCox = 10-4 A/V2 while µpCox = 5 × 10-5 A/V2 . Fig. 3.1 (a). Draw the logic gate symbol of the above CMOS digital circuit. (2 marks) (b). Sketch the output waveform Vout for the given input voltage signals VA and VB. Assume that the logic circuit is fast enough to respond to the given input waveform. Voltage levels and any other key features must be labelled properly. (8 marks) (c). If both the inputs VA and VB are connected to VDD, determine the equivalent resistance linking the output to ground. (7 marks) (e). If the inputs VA and VB are tied together, sketch a graph of the output voltage Vout as a function of VA from 0 V to 1.8 V in the static case. Any turning point(s) or important features (e.g. voltage levels) as well as axes must be shown clearly or labelled explicitly. (8 marks)
Solution
0 0