Question

Notify Me Bookmark

The RC circuit shown in the figure has resistance of R = 7, 6 kΩ and the capacitance of C = 3, 2 μF. The capacitor is initially charged at a voltage V0 = 34, 3 V at t = 0, when the switch is closed. How long does it take for the current running in the circuit to go down to 49% of its initial value? Express your answer in units of ms (milliseconds) using two decimal places.

The RC circuit shown in the figure has resistance of R = 7, 6 kΩ and the capacitance of C = 3, 2 μF. The capacitor is initially charged at a voltage V0 = 34, 3 V at t = 0, when the switch is closed. How long does it take for the current running in the circuit to go down to 49% of its initial value? Express your answer in units of ms (milliseconds) using two decimal places.

Image text
The RC circuit shown in the figure has resistance of R = 7 , 6 k Ω and the capacitance of C = 3 , 2 μ F . The capacitor is initially charged at a voltage V 0 = 34 , 3 V at t = 0 , when the switch is closed. How long does it take for the current running in the circuit to go down to 49 % of its initial value? Express your answer in units of ms (milliseconds) using two decimal places.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

The RC circuit shown in the figure has resistance of R = 1,8 kΩ and the capacitance of C = 1,1 μF. The capacitor is initially charged at a voltage V0 = 20,4 V at t = 0, when the switch is closed. How long does it take for the current running in the circuit to go down to 45% of its initial value? Express your answer in units of ms (milliseconds) using two decimal places.
Solution
0 0

Consider the circuit shown in the figure below. The ideal battery provides an emf ε = 7.00 V, and the initially uncharged capacitor has capacitance C = 8.53 μF. The resistors are R1 = 2R, R2 = 4R, and R3 = 7R where R = 15 Ω. The switch is closed at t = 0. (a) How much current passes through the capacitor at t = 0? mA (b) How much current passes through the capacitor at t = ∞? mA (c) How much charge is eventually stored on the capacitor at t = ∞? μC (d) How long does it take for the charge on capacitor to increase to 80% of its eventual charge? μs (e) Suppose that the initially uncharged capacitor was filled with a dielectric with dielectric constant κ before the switch was closed at t = 0. In this case, your answer to part (d) would decrease remain the same increase
Solution
0 0

Consider a DRAM cell that uses an internal capacitor of 20 fF; it is charged to 3.3 V when storing a ' 1 '. In this problem, ignore body effect. (A real transistor like the access transistor here, or pass transistors in switch logic, can turn off before you want it to because of body effect; this one stays on until the 20 fF capacitor is fully charged. ) (6-points) (a) When writing a ' 1 ', how long does it take for the voltage on the capacitor to rise to 95% of its final value? Assume that when it is on, the access transistor in the cell has an average resistance of 6 kΩ; assume that the inverter driving the bit line has an average pull-up resistance of 1 kΩ. Ignore the resistance and capacitance of the bit line itself. (In a real memory, wire parasitics play a big role!)? (b) Suppose that when reading, the bit line is first charged to 3.3 V. The bit line is a large piece of metal, and has a total capacitance of 500 fF. How far does the bit line drop in voltage if a ' 0 ' is read? (Hint: In circuits, you learned that charge on capacitors in parallel redistributes until the voltage is equal; assume enough time is given for the bit line to drop as far as it ever will. )? (c) Suppose that the leakage current from the cell, due to the reverse-biased diode and subthreshold MOSFET currents, is no more than 2 pA. If a signal loss on the capacitor of 0.5 V can be tolerated, how often must the DRAM cell be refreshed to ensure that no data is lost?

Solution
0 0