The transistor parameters: VTP = −1 V, kp = 2 mA/v2, λ = 0 and by usin

Question

Notify Me Bookmark

The transistor parameters: VTP = −1 V, kp = 2 mA/v2, λ = 0 and by using Table 2 . a) Find VSGQ and VSDQ of the FET amplifier as shown In Figure 2. b) Derive an expression for mid-band voltage gain (vo/vs) of the FET amplifier. c) Sketch the gain (vo/vs) in dB versus frequency. Clearly label all break points. Note 1: When designing the circuit, please show the solution step by step. Note 2: The values of all results must be four digits after the point. Figure 2. Table 2

Image text

The transistor parameters:

V_{T} = - 1 V, k_{p} = 2 m A / v^{2}, λ = 0

and by using Table 2 . a) Find

V_{S Q Q}

and

V_{soQ}

of the FET amplifier as shown In FIgure 2. b) Derive an expression for mid-band voltage gain (

V_{d} / ν_{s}

) of the FET amplifier. c) Sketch the gain

(ν_{d} / v_{s})

in dB versus frequency. Clearly label all break points.

Note 1: When designing the circuit, please show the solution step by step. Note 2: The values of all results must be four digits after the point. Figure 2. Table 2