Question

Notify Me Bookmark

Transistor M1 in the circuit shown in Fig. (7), has the following characteristics: VTH = 1 volt, K = 2 mA/V2, λ = 0.01 V−1. Given VDD = 10 volt, RL = 10 kΩ and C1 = C2 = ∞. a. Design the circuit to have the following specifications: input resistance Rin = 100 kΩ, ID = 2 mA. (Provide values for R1, R2, and RD). b. Determine the output resistance, Ro. c. Determine the maximum undistorted peak to the peak output voltage. (15 marks) Answer Q3-2 Fig. 7

Transistor M1 in the circuit shown in Fig. (7), has the following characteristics: VTH = 1 volt, K = 2 mA/V2, λ = 0.01 V−1. Given VDD = 10 volt, RL = 10 kΩ and C1 = C2 = ∞. a. Design the circuit to have the following specifications: input resistance Rin = 100 kΩ, ID = 2 mA. (Provide values for R1, R2, and RD). b. Determine the output resistance, Ro. c. Determine the maximum undistorted peak to the peak output voltage. (15 marks) Answer Q3-2 Fig. 7

Image text
  1. Transistor M1 in the circuit shown in Fig. (7), has the following characteristics: V T H = 1 volt, K = 2 m A / V 2 , λ = 0.01 V − 1 . Given V D D = 10 volt, R L = 10 k Ω and C 1 = C 2 = ∞ . a. Design the circuit to have the following specifications: input resistance R in = 100 k Ω , I D = 2 m A . (Provide values for R 1 , R 2 , and R D ). b. Determine the output resistance, R o . c. Determine the maximum undistorted peak to the peak output voltage. (15 marks)
Answer Q3-2
Fig. 7

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Figure 1 shows a single stage common source MOSFET amplifier circuit. We wish to design the circuit to meet the following design specifications: Load Resistance: RL = 100 KΩ Input Resistance: Ri > 200 KΩ Mid-band Gain: Gv = Vo/Vi = −50 ± 20% Supply Voltage: +15 Volts Circuit Capacitors: CG = 10μF; CS = 47μF; CD = 10μF Figure 1. Common Source MOSFET Amplifier Pre-lab: (a) Design the amplifier to meet the specifications above by choosing values for resistors R1, R2, RD and RS. Begin your design by choosing an appropriate value for the bias current ID. If ID ≈ 0.3 mA, assume VT ≈ 1.7 V, Kn ≈ 0.02 A/V2 and VA = 100 V(λ = 0.01 V−1). Find the small signal approximation of the input resistance Rin where Rin = R1∥R2 Find the small signal approximation of the output resistance Ro, where Ro is given as Ro = RD∥RL∥ro. The small signal mid-band gain of the amplifier is given by Gv = −gmRo where gm = 2knID = kn(VGS−VT) Once you choose ID the DC biasing of the transistor can be found using simple rules of thumb. The voltage VG should be approximately equal to VDD/3 > VT. For maximum symmetry, VD should be biased at the midpoint between VD(Max) and VD(Min). Clearly, the maximum VD is VDD and the minimum VD > VG−Vt. For example, if Vt = 1.7 V and VG = 1/3VDD = 5 V, then VD ≈ 9 V for maximum symmetry.

Figure 1 shows a single stage common source MOSFET amplifier circuit. We wish to design the circuit to meet the following design specifications: Load Resistance: RL = 100 KΩ Input Resistance: Ri > 200 KΩ Mid-band Gain: Gv = Vo/Vi = −50 ± 20% Supply Voltage: +15 Volts Circuit Capacitors: CG = 10μF; CS = 47μF; CD = 10μF Figure 1. Common Source MOSFET Amplifier Pre-lab: (a) Design the amplifier to meet the specifications above by choosing values for resistors R1, R2, RD and RS. Begin your design by choosing an appropriate value for the bias current ID. If ID ≈ 0.3 mA, assume VT ≈ 1.7 V, Kn ≈ 0.02 A/V2 and VA = 100 V(λ = 0.01 V−1). Find the small signal approximation of the input resistance Rin where Rin = R1∥R2 Find the small signal approximation of the output resistance Ro, where Ro is given as Ro = RD∥RL∥ro. The small signal mid-band gain of the amplifier is given by Gv = −gmRo where gm = 2knID = kn(VGS−VT) Once you choose ID the DC biasing of the transistor can be found using simple rules of thumb. The voltage VG should be approximately equal to VDD/3 > VT. For maximum symmetry, VD should be biased at the midpoint between VD(Max) and VD(Min). Clearly, the maximum VD is VDD and the minimum VD > VG−Vt. For example, if Vt = 1.7 V and VG = 1/3VDD = 5 V, then VD ≈ 9 V for maximum symmetry.
Solution
1 0

The following circuit is a common drain amplifier with a p-channel MOSFET. Design this source follower circuit to have a bias current of ISD = 2.5 mA, an output voltage of VO = 10 V with zero input. Determine the values for R1, R2, and RS. (20 points) Given VDD = 20 V, Ri = 4 kΩ and Rin = 200 kΩ. The p-channel transistor has the following characteristics VTH = −2 V, K = 0.8 mA/V2 and λ = 0. Useful formulae: for p-channel MOSFET iSD = K[(vSG−|vTH|)vSD − 12 vsD2] triode region iSD = 12 K(vSG − |VTH|)2(1+λvSD) saturation region
Solution
0 0

P11.52. Consider the amplifier shown in Figure P11.52. a. Draw the small-signal equivalent circuit, assuming that the capacitors are short circuits for the signal. b. Assume that rd = ∞, and derive expressions for the voltage gain, input resistance, and output resistance. c. Find IDQ if R = 100 kΩ, Rf = 100 kΩ, RD = 3 kΩ, RL = 10 kΩ, VDD = 20 V, Vto = 5 V, and K = 1 mA/V2. Determine the value of gm at the Q point. d. Evaluate the expressions found in part (b) by using the values given in part (c). e. Find vo(t) if v(t) = 0.2 sin⁡(2000πt). f. Is this amplifier inverting or noninverting? Figure P11.52
Solution
0 0