Question

Notify Me Bookmark

What is the intrinsic voltage gain in V/V for a MOSFET with L = 35 nm in a CMOS process with a DIBL characteristic length of 17.1 nm ? Answer: Check

What is the intrinsic voltage gain in V/V for a MOSFET with L = 35 nm in a CMOS process with a DIBL characteristic length of 17.1 nm ? Answer: Check

Image text
What is the intrinsic voltage gain in V/V for a MOSFET with L = 35 n m in a CMOS process with a DIBL characteristic length of 17.1 n m ?
Answer: ◻ Check

Detailed Answer

4 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (4)
  • Correct answers (4)
  • Complete solution (4)
  • Step-by-step solution (4)
  • Fully explained (4)

Similar/Related Questions

What is the minimum channel length in nanometers that can be used to achieve an intrinsic voltage gain of at least 86 V/V in a CMOS process with a DIBL characteristic length of 15.2 nm? Answer: The correct answer is: 67.7
Solution
4 0

A MOS capacitor has an n+ polysilicon gate with EF = EC+0.15 eV in the polysilicon, a 50 nm thick SiO2 gate dielectric with Qss = 0, and a p-type silicon substrate with Na = x.5×1016 /cm3, where x is the last digit of your student number. For silicon at room temperature ni = 1010 /cm3, Nv = 1.8×1019 /cm3, Nc = 3.2×1019 /cm3, and ϵSi = 11.7ϵ0. For SiO2 ϵSiO2 = 3.9ϵ0. a. Find the threshold voltage for this MOS capacitor. b. If the capacitor is made into a MOSFET with L = 2 μm, W = 200 μm, and a channel field effect mobility of 450 cm2/V⋅s, find ID for VGS − VT = 2 V and VDS = 1 V. c. Suppose it is desired to have a depletion mode MOSFET and that any gate oxide thickness is possible, but no other parameters can be changed. What is the most negative threshold voltage that is possible for the MOS capacitor with your substrate doping? d. Suppose it is desired to have a MOSFET with a threshold voltage of +0.5 V and again any gate oxide thickness is possible, but no other parameters can be changed. What oxide thickness will give VT = 0.5 V ? e. Suppose the source, drain, and body of the MOSFET are all grounded and the capacitance-voltage characteristics are measured. Sketch the high and low frequency capacitance-voltage characteristics and label significant features.
Solution
0 0

The CMOS amplifier in Fig 1 is fabricated in the 0.13-um CMOS process, whose parameters are specified in Table K.1 (Appendix K) in the textbook. All transistors have L = 0.4-um and are operated at Vov = 0.15 V,IREF = 100 uA and VDD = 1.3 V. (a) Find the DC component of vt and the W/L ratios of the transistors. (b) (b) Determine the small-signal voltage gain. (c) What is the allowable range of signal swing at the output for almost-linear operation? (d) If the current-source load is replaced with a resistance RD connected to a power supply V

The CMOS amplifier in Fig 1 is fabricated in the 0.13-um CMOS process, whose parameters are specified in Table K.1 (Appendix K) in the textbook. All transistors have L = 0.4-um and are operated at Vov = 0.15 V,IREF = 100 uA and VDD = 1.3 V. (a) Find the DC component of vt and the W/L ratios of the transistors. (b) (b) Determine the small-signal voltage gain. (c) What is the allowable range of signal swing at the output for almost-linear operation? (d) If the current-source load is replaced with a resistance RD connected to a power supply V
Solution
1 0