Question

Notify Me Bookmark

What is the unity-gain frequency of an NMOS transistor with gm = 599 uA/V, Cgs = 24 fF and Cgd = 11 fF? (GHz to 2 decimal places)

What is the unity-gain frequency of an NMOS transistor with gm = 599 μA/V, Cgs = 24 fF and Cgd = 11 fF ? (GHz to 2 decimal places)

Image text
What is the unity-gain frequency of an NMOS transistor with gm = 599 uA/V, Cgs = 24 fF and Cgd = 11 fF? (GHz to 2 decimal places)

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)

Similar/Related Questions

A MOSFET common-source amplifier has gm = 2.0 mA/V, ro = 100 KΩ, RD = 10 KΩ, Cgs = 2 pF, Cgd = 0.4 pF. The amplifier is fed from a voltage source with an internal resistance of 500 KΩ and the output is connected to a 10 KΩ load. If the lower cutoff frequency (fL) is 10 KHz, find the Gain-bandwidth product of this amplifier in (dB) KHz (ignore the sign). Approximate your answer to 2 decimal point accuracy.

Solution
1 0

The NMOS transistor in the CS amplifier circuit of the figure is biased to have gm = 4 mA/V. a)Find AM, fP1, fP2, fP3, and fL. (Assume the largest pole value as fL) b)Assume that the same amplifier is biased to have gm = 1 mA/V, ro = 100 kohm, Cgs = 1 pF, Cgd = 0.2 pF, Find AM and fH. (Use Miller approximation.) Draw the frequency response.
Solution
4 0

Using the n-channel MOSFET small signal model shown in the Fig. 1, please derive the following expression: Fig. 1 (a) Derive short-circuit forward gain, Ai(s) = IO/Ii (b) Please draw a cross-sectional view of an NMOS on p substrate. It is important to show the overlap region between the gate and source/drain in your drawing. (c) Please calculate the Cgs and Cgd if the MOS device is operated at the saturation region. The related parameters are tox = 4 nm, εox = 3. 9ε0, ε0 = 8. 86∗10−14 F/cm, L = 0. 18 μm, Lov = 0. 027 μm, W = 10 μm. (d) Please calculate the Cgs and Cgd if the MOS device is operated at the triode region. The related parameters are tox = 4 μm, εox = 3. 9ε0, ε0 = 8. 86∗10−14 F/cm, L = 0. 18 μm, Lov = 0. 027 μm, W = 10 μm. (e) If kn′ = 350 uA/V2 and the MOS is operated at 100 uA. Calculate the unity-gain frequency fT.

Solution
0 0