Question

Notify Me Bookmark

A variable star is one whose brightness alternately increases and decreases. For one such star, the time between periods of maximum brightness is 4.5 days, the average brightness (or magnitude) of the star is 5.1 , and its brightness varies by ±0.30 magnitude. Find a function that models the brightness of the star as a function of time (in days), t. (Assume that at t = 0 the brightness of the star is 5.1 and that it is increasing.) f(t) =

A variable star is one whose brightness alternately increases and decreases. For one such star, the time between periods of maximum brightness is 4.5 days, the average brightness (or magnitude) of the star is 5.1 , and its brightness varies by ±0.30 magnitude. Find a function that models the brightness of the star as a function of time (in days), t. (Assume that at t = 0 the brightness of the star is 5.1 and that it is increasing.) f(t) =

Image text
A variable star is one whose brightness alternately increases and decreases. For one such star, the time between periods of maximum brightness is 4.5 days, the average brightness (or magnitude) of the star is 5.1 , and its brightness varies by ± 0.30 magnitude. Find a function that models the brightness of the star as a function of time (in days), t . (Assume that at t = 0 the brightness of the star is 5.1 and that it is increasing.)
f ( t ) =

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

In Figure P 28.67, suppose the switch has been closed for a length of time sufficiently long for the capacitor to become fully charged. (E = 8.70 V, r1 = 11 kΩ, and r2 = 16 kΩ.) Figure P28.67 (a) Find the steady-state current in each resistor. I1 = μA I2 = μA I3−kΩ = μA (b) Find the charge Q on the capacitor. μC (c) The switch is opened at t = 0. Write an equation for the current IR2 in R2 as a function of time. (271 μA)e−t/(0.190 s) (322 μA)e−t/(0.190 s) (322 μA)et/(0.190 s) (271 μA)et/(0.190 s) (d) Find the time that it takes for the charge on the capacitor to fall to one-fifth its initial value. ms
Solution
0 0

The inverter circuit shown uses a device X with graphical characteristics consisting of two straight lines (see graph on right): one through the origin and the point (VA, IA), and the other a horizontal line at ix = IA, starting at vx = VA. The MOSFET parameters are: k = 1.6 mA/V2 and Vt = 0.7 V. The supply voltage is VDD = 4 V, and for device X, VA = 0.5 V. Find the value of VOH in V. a) 4.5 b) 3.5 c) 4.0 d) 5.0 e) 3.0 Find the value of VOL in V, when IA = 1 mA. a) 0.233 b) 0.168 c) 0.148 d) 0.195 e) 0.290 In the following three questions, assume that the value of IA is adjusted such that it results in VOL = 0.2 V. Hint: When the output is low, IA = 12 k(2(VOH − Vt)VOL − VOL2) 3. Find the average static power dissipation (in mW ) when the input is low 50% of the time, and high 50% of the time. a) 1.51 b) 1.06 c) 2.05 d) 3.36 e) 2.66 4. Find the value of VM in V (at vI = VM, vO = VM ). a) 1.64 b) 2.00 c) 1.83 d) 1.92 e) 1.74 5. Find the high-to-low propagation delay ( tPHL in ns ) when a 1 pF capacitor is connected between the output of the inverter and ground. Use the average capacitor current method. a) 0.249 b) 0.212 c) 0.185 d) 0.380 e) 0.301

Solution
0 0

A double pulse test circuit, as shown below, has a DC-link voltage, VDC = 100 V and the inductor has a value of L = 200 μH. At t = 0, a gate-source voltage, vgs = 20 V is applied to the MOSFET, which is enough to turn it on. The vgs = 20 V is applied for the time period Ton after which it is turned down to vgs = 0 V for the time period Tof. There is no initial current stored in the inductor prior to t = 0. Describe what is the purpose of the double pulse test circuit, and what information can be derived from the use of the circuit? Explain the purpose of the diode in the double pulse test circuit, and what happens if it is removed? Sketch the currents iL, is and iD as a function of time. Calculate the time Ton required for the inductor current (iL) to be 20 A at the end of t = Ton Calculate how much energy is stored in the inductor L at t = Ton The MOSFET has a thermal resistance junction-to-case, Rsc = 0.8 K/W, case-to-heatsink Rcs = 1.2 K/W and heatsink-toambient RsA = 4 K/W. For a maximum junction temperature of TJ max = 175∘C and ambient temperature TA = 50∘C, what is the maximum allowed power dissipation ?

Solution
0 0