Question

Notify Me Bookmark

Evaluate the surface integral. S is the part of the cylinder z2+y2 = 1 between the planes x = 0 and x = 1 in the first octant. ∬S5(x2 y+z)dS

Evaluate the surface integral. S is the part of the cylinder z2+y2 = 1 between the planes x = 0 and x = 1 in the first octant. ∬S5(x2 y+z)dS

Image text
Evaluate the surface integral. S is the part of the cylinder z 2 + y 2 = 1 between the planes x = 0 and x = 1 in the first octant.
∬ S 5 ( x 2 y + z ) d S

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

 

Problem #1. A surface that is 3 m long contains two springs at opposite ends with a patch of friction μk = 0.2 between x = 1 m and x = 2 m. The spring constant k1 for the spring on the left is 680 N/m and the equilibrium length is 0.6 m. The spring constant k2 for the spring on the right is 700 N/m and the equilibrium length is 0.5 m. At the start of the experiment, a block of mass 8 kg is pushed against the spring on the left so that the spring is compressed to x = 0.1 m. The block is then released from rest. A. Determine the displacement of spring 2 the first time block compresses it. B. Determine the displacement of spring 2 the second time the block compresses it. C. At what position (x) along the surface does the block come to rest?
Solution
0 0

a) Assuming we can control the VIN between 0.5 V and 2.5 V, find the maximum value for resistor R as a function of VIN for the NMOS to stay in saturation. Note: The pullup resistor R is preferred to be large, a bit too large, and we go into the linear region of operation. b) Assume we want to keep the VOUT at 1.5 V, and ID at 200 uA. What should be the values for bias voltage VIN and resistor R? c) Based on part (b) values, find the maximum and minimum values for VOUT and VIN so that the NMOS stays in saturation. d) Based on part (b) values, find open circuit small signal gain, AV. Hint: Need to find values for gm and g0 first. For the following NMOS amplifier (driving load RL ) with the following parameters: Vdd = 2.5v Vbs = 0 RL = 10 k Vt0 = 0.5v lambda = 0.11v-1 W/L = 10 unCox = 200.0 uA/V2 Suppose the load resistor, RL, is not connected (open circuit):

Solution
1 0

Define R as the region bounded by the functions f(x) = √x and g(x) = 1 x between x = 1 and x = 3. Choose the integral below that describes the volume of the solid created by rotating R around the x-axis. ∫1 3 [√x – 1/x ] 2 dx ∫1 3 π [(√x)^2 - ( 1/x )^2 ] dx ∫3 1 π [(√x)^2 - ( 1/x )^2 ] dx ∫1 3 π [( 1/x )^2 - (√x)^2 ] dx ∫1 3 [ 1/x - √x]^2 dx
Solution
0 0