Question

Notify Me Bookmark

The combined electrical resistance R of R1 and R2, connected in parallel, is given by the equation below, where R, R1, and R2 are measured in ohms. R1 and R2 are increasing at rates of 0.8 and 1.5 ohms per second, respectively. 1 R = 1 R1+1 R2 At what rate is R changing when R1 = 54 ohms and R2 = 84 ohms? (Round your answer to three decimal places.) ohm/sec

The combined electrical resistance R of R1 and R2, connected in parallel, is given by the equation below, where R, R1, and R2 are measured in ohms. R1 and R2 are increasing at rates of 0.8 and 1.5 ohms per second, respectively. 1 R = 1 R1+1 R2 At what rate is R changing when R1 = 54 ohms and R2 = 84 ohms? (Round your answer to three decimal places.) ohm/sec

Image text
The combined electrical resistance R of R 1 and R 2 , connected in parallel, is given by the equation below, where R , R 1 , and R 2 are measured in ohms. R 1 and R 2 are increasing at rates of 0.8 and 1.5 ohms per second, respectively.
1 R = 1 R 1 + 1 R 2
At what rate is R changing when R 1 = 54 ohms and R 2 = 84 ohms? (Round your answer to three decimal places.) ◻ ohm/sec

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

a. In the given circuit, the MOSFET operates based on the model iD = K(vGS − Vt)^2, as long as vds ≥ vGS−VT, where K is 1.16 milli-siemens per volt, and VT = 0.6 volts. The resistances R1 and R2 are 590 kilo-ohms and 100 kilo-ohms, respectively. What is the maximum value of RD for which the device is in saturation? Provide your answer in kilo-ohms. b. In the given circuit, assuming RD = 4 5 kilo-ohms, what is the maximum current iD that can flow through the device while ensuring the device remains in saturation? For this question, disregard the earlier values of R1 and R2.
Solution
0 0

The ordering and transportation cost C for the components used in manufacturing a product is given below, where C is measured in thousands of dollars and x is the order size in hundreds. (Round your answers to two decimal places.) C = 145(239 x2 + x x+22), x ≥ 1 (a) Find the rate of change of C with respect to x when x = 10. C′(10) = thousand dollars /100 components (b) Find the rate of change of C with respect to x when x = 15. C′(15) = thousand dollars 100 components (c) Find the rate of change of C with respect to x when x = 20. C′(20) = thousand dollars 100 components What do these rates of change imply about increasing order size? The cost per item with increasing order size.
Solution
0 0

Figure a shows a rod of resistive material. The resistance per unit length of the rod increases in the positive direction of the x axis. At any position x along the rod, the resistance dR of a narrow-differential-section of width dx is given by dR = 5.00xdx, where dR is in ohms and x is in meters. Figure b shows such a narrow section. You are to slice off a length of the rod between x = 0 and some position x = L and then connect that length to a battery with potential difference V = 5.0 V (Fig. c). You want the current in the length to transfer energy to thermal energy at the rate of 3.2 W. At what position x = L in meters should you cut the rod? Keep 2 decimal points in your answer.
Solution
0 0