Question

Notify Me Bookmark

Use the improved Euler’s method to obtain a four-decimal approximation of the indicated value. First use h = 0.1 and then use h = 0.05. y’ = 4x – 3y + 3, y(1) = 4; y(1.5) h = 0.1 y(1.5) h = 0.05 y(1.5)

Use the improved Euler’s method to obtain a four-decimal approximation of the indicated value. First use h = 0.1 and then use h = 0.05. y’ = 4x – 3y + 3, y(1) = 4; y(1.5) h = 0.1 y(1.5) h = 0.05 y(1.5)

Image text
Use the improved Euler’s method to obtain a four-decimal approximation of the indicated value. First use h = 0.1 and then use h = 0.05. y’ = 4x – 3y + 3, y(1) = 4; y(1.5) h = 0.1 y(1.5) h = 0.05 y(1.5)

Detailed Answer

1 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (1)
  • Correct answers (1)
  • Complete solution (1)
  • Step-by-step solution (1)
  • Fully explained (1)

Similar/Related Questions

A block of mass M and contact area A slides on a thin film of oil with thickness h as shown in the figure. When released, a mass m exerts tension on the cord, causing the block to accelerate. (a) Neglect friction in the pulley and air resistance, and develop an algebraic expression for the viscous force that acts on the block when it moves at a speed V. (b) Derive a differential equation for the block speed as a function of time, and obtain an expression for the block speed as a function of time. (c) For the values μ = 0.04 Pa−s, m = 2 kg, A = 10 cm2, and h = 0.1 mm, determine the block mass M if it takes 10 s for the block speed to reach 1 m/s.
Solution
0 0

A block of mass m = 0.1 kg falls down a ramp of height h = 0.5 m and angle θ = 30 degrees. The coefficient of kinetic friction between the block and the ramp is given by μ, which will vary throughout this problem. At the end of the ramp, the block slides along a frictionless horizontal surface until it makes contact with, and compresses, a mass-less spring with spring constant k = 1.0 N/m. Assume g = 9.81 m/s2. Determine the following:Assume the ramp is frictionless (i. e., μ = 0). What is the maximum distance that the spring will compress? What coefficient of kinetic friction, μ, will cause the spring to compress by exactly half the distance that it did when the ramp was frictionless? Using the value of the coefficient of friction found in part 2, when the spring pushes the block back towards the ramp, what is the maximum height that the block reaches?
Solution
0 0

Consider a CMOS inverter, with the following device parameters: nMOS VT0,n = 0.6 V unCox = 60 uA/V2 pMOS VT0,p = -0.8 V upCox = 20 uA/V2 Also: VDD = 3 V (a) Determine the (W/L) ratios of the nMOS and the PMOS transistor such that the switching threshold is Vth = 1.5 V. (b) Plot the VTC of the CMOS inverter using SPICE. (c) Determine the VTC of the inverter for lambda = 0.05 V-1 and 0.1 V-1. (d) Discuss how the noise margins are influenced by non-zero lambda, value. Note that transistors with very short channel lengths (manufactured with sub-micron design rules) tend to have larger

Solution
1 0