Question

Notify Me Bookmark

1. [12 pts] The diagram at the right shows two charged conducting objects, A and B, with electric field lines drawn as shown. The electric potential of the surface of B is 200 V and is -50 Volts on the surface of A. Explain your answers to the following questions: a. What are the sign of the charges on A and B? Explain. b. Draw representative equipotential lines in the region surrounding A and B. Label representative values of the electric potential on these equipotential surfaces. Explain your drawing.

1. [12 pts] The diagram at the right shows two charged conducting objects, A and B, with electric field lines drawn as shown. The electric potential of the surface of B is 200 V and is -50 Volts on the surface of A. Explain your answers to the following questions: a. What are the sign of the charges on A and B? Explain. b. Draw representative equipotential lines in the region surrounding A and B. Label representative values of the electric potential on these equipotential surfaces. Explain your drawing.

Image text
1.[12 pts] The diagram at the right shows two charged conducting objects, A and B , with electric field lines drawn as shown. The electric potential of the surface of B is 200 V and is -50 Volts on the surface of A. Explain your answers to the following questions: a. What are the sign of the charges on A and B? Explain. b. Draw representative equipotential lines in the region surrounding A and B. Label representative values of the electric potential on these equipotential surfaces. Explain your drawing.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Part A Suppose that a conducting sphere of radius R carries a charge q. Find the electric potential V on the surface of the sphere. (Assume that infinitely far away from the sphere the potential is 0. ) Write your answer in terms of q, R and ϵ0. Submit Request Answer Part B Find the potential energy U of the charged sphere. Write your answer in terms of q, R and ϵ0. U = Part C Now suppose there are two conducting spheres with radii R1 and R2. We have a total charge Q to place on these two spheres, so we put q on sphere 1 and Q−q on sphere 2. Find the total potential energy U of both spheres. (Assume the spheres are far enough apart that they don't interact with each other. Thus the total energy is U = U1+U2, with U1 and U2 as in Part B. ) Write your answer in terms of q, Q, R1, R2 and ϵ0. Submit Request Answer Part D If we connect the two spheres with a thin wire, charge will flow from one to the other until the total potential energy is a minimum. What value of q makes the potential energy U as small as possible? Write your answer in terms of Q, R1, R2 and ϵ0. Part E After we connect the wire and allow the charge to redistribute itself, what is the potential V1 on the surface of sphere 1 ? Write your answer in terms of Q, R1, R2 and ϵ0. Submit Request Answer Part F After we connect the wire and allow the charge to redistribute itself, what is the potential V2 on the surface of sphere 2? Write your answer in terms of Q, R1, R2 and ϵ0. Part A Suppose that a conducting sphere of radius R carries a charge q. Find the electric potential V on the surface of the sphere. (Assume that infinitely far away from the sphere the potential is 0. ) Write your answer in terms of q, R and ϵ0. Submit Request Answer Part B Find the potential energy U of the charged sphere. Write your answer in terms of q, R and ϵ0. U = Part C Now suppose there are two conducting spheres with radii R1 and R2. We have a total charge Q to place on these two spheres, so we put q on sphere 1 and Q−q on sphere 2. Find the total potential energy U of both spheres. (Assume the spheres are far enough apart that they don't interact with each other. Thus the total energy is U = U1+U2, with U1 and U2 as in Part B. ) Write your answer in terms of q, Q, R1, R2 and ϵ0. Submit Request Answer Part D If we connect the two spheres with a thin wire, charge will flow from one to the other until the total potential energy is a minimum. What value of q makes the potential energy U as small as possible? Write your answer in terms of Q, R1, R2 and ϵ0. Part E After we connect the wire and allow the charge to redistribute itself, what is the potential V1 on the surface of sphere 1 ? Write your answer in terms of Q, R1, R2 and ϵ0. Submit Request Answer Part F After we connect the wire and allow the charge to redistribute itself, what is the potential V2 on the surface of sphere 2? Write your answer in terms of Q, R1, R2 and ϵ0. Part A Suppose that a conducting sphere of radius R carries a charge q. Find the electric potential V on the surface of the sphere. (Assume that infinitely far away from the sphere the potential is 0. ) Write your answer in terms of q, R and ϵ0. Submit Request Answer Part B Find the potential energy U of the charged sphere. Write your answer in terms of q, R and ϵ0. U = Part C Now suppose there are two conducting spheres with radii R1 and R2. We have a total charge Q to place on these two spheres, so we put q on sphere 1 and Q−q on sphere 2. Find the total potential energy U of both spheres. (Assume the spheres are far enough apart that they don't interact with each other. Thus the total energy is U = U1+U2, with U1 and U2 as in Part B. ) Write your answer in terms of q, Q, R1, R2 and ϵ0. Submit Request Answer Part D If we connect the two spheres with a thin wire, charge will flow from one to the other until the total potential energy is a minimum. What value of q makes the potential energy U as small as possible? Write your answer in terms of Q, R1, R2 and ϵ0. Part E After we connect the wire and allow the charge to redistribute itself, what is the potential V1 on the surface of sphere 1 ? Write your answer in terms of Q, R1, R2 and ϵ0. Submit Request Answer Part F After we connect the wire and allow the charge to redistribute itself, what is the potential V2 on the surface of sphere 2? Write your answer in terms of Q, R1, R2 and ϵ0.

Solution
0 0

10a) (15 Points) In the following circuit, an NMOS transistor is used to switch the current to the LED. Assume the following parameters: Microcontroller: vO = 4.6 V iOH < −5 mA and vOL = 0.4 V, iOL < 8 mA LED: vf = 2.0 V, PLED−max = 200 mW Desired LED current 100 mA Transistor: vT = 1.0 V, RDS(ON) = 0.5 Ω, iD−max = 500 mA a. When the output of the microcontroller is low, what is the operating region of the transistor? b. When the output of the microcontroller is high, what is the operating region of the transistor? c. With the microcontroller output high, and the transistor in the ohmic region, what value of R results in an on-state LED current of 100 mA? d. What standard value of resistor (Table is on page 33 of the text) comes closest to the desired LED current? 10b) Suppose we rearrange the NMOS circuit in problem 10 as shown. Using the same parameters as in the previous problem, answer the following: a. When the output of the microcontroller is low, what is the operating region of the transistor? b. Suppose that when the output of the microcontroller is high, there is 100 mA current through the LED with the same resistor as found in problem 10a. What is the source voltage relative to ground? What is the gate-source voltage? c. Do you expect this arrangement to work for controlling the LED? Explain. 10c) (15 Points) In this problem, the NMOS transistor in problem 10b has been replaced with a PMOS transistor as shown. Assume all the parameters are the same, noting that the gate must be the threshold voltage below the source to get out of cutoff. a. When the output of the microcontroller is high, what is the operating region of the transistor? b. When the output is low, what is the operating region of the transistor? c. Does this arrangement to work for controlling the LED? Explain.10a) (15 Points) In the following circuit, an NMOS transistor is used to switch the current to the LED. Assume the following parameters: Microcontroller: vO = 4.6 V iOH < −5 mA and vOL = 0.4 V, iOL < 8 mA LED: vf = 2.0 V, PLED−max = 200 mW Desired LED current 100 mA Transistor: vT = 1.0 V, RDS(ON) = 0.5 Ω, iD−max = 500 mA a. When the output of the microcontroller is low, what is the operating region of the transistor? b. When the output of the microcontroller is high, what is the operating region of the transistor? c. With the microcontroller output high, and the transistor in the ohmic region, what value of R results in an on-state LED current of 100 mA? d. What standard value of resistor (Table is on page 33 of the text) comes closest to the desired LED current? 10b) Suppose we rearrange the NMOS circuit in problem 10 as shown. Using the same parameters as in the previous problem, answer the following: a. When the output of the microcontroller is low, what is the operating region of the transistor? b. Suppose that when the output of the microcontroller is high, there is 100 mA current through the LED with the same resistor as found in problem 10a. What is the source voltage relative to ground? What is the gate-source voltage? c. Do you expect this arrangement to work for controlling the LED? Explain. 10c) (15 Points) In this problem, the NMOS transistor in problem 10b has been replaced with a PMOS transistor as shown. Assume all the parameters are the same, noting that the gate must be the threshold voltage below the source to get out of cutoff. a. When the output of the microcontroller is high, what is the operating region of the transistor? b. When the output is low, what is the operating region of the transistor? c. Does this arrangement to work for controlling the LED? Explain.10a) (15 Points) In the following circuit, an NMOS transistor is used to switch the current to the LED. Assume the following parameters: Microcontroller: vO = 4.6 V iOH < −5 mA and vOL = 0.4 V, iOL < 8 mA LED: vf = 2.0 V, PLED−max = 200 mW Desired LED current 100 mA Transistor: vT = 1.0 V, RDS(ON) = 0.5 Ω, iD−max = 500 mA a. When the output of the microcontroller is low, what is the operating region of the transistor? b. When the output of the microcontroller is high, what is the operating region of the transistor? c. With the microcontroller output high, and the transistor in the ohmic region, what value of R results in an on-state LED current of 100 mA? d. What standard value of resistor (Table is on page 33 of the text) comes closest to the desired LED current? 10b) Suppose we rearrange the NMOS circuit in problem 10 as shown. Using the same parameters as in the previous problem, answer the following: a. When the output of the microcontroller is low, what is the operating region of the transistor? b. Suppose that when the output of the microcontroller is high, there is 100 mA current through the LED with the same resistor as found in problem 10a. What is the source voltage relative to ground? What is the gate-source voltage? c. Do you expect this arrangement to work for controlling the LED? Explain. 10c) (15 Points) In this problem, the NMOS transistor in problem 10b has been replaced with a PMOS transistor as shown. Assume all the parameters are the same, noting that the gate must be the threshold voltage below the source to get out of cutoff. a. When the output of the microcontroller is high, what is the operating region of the transistor? b. When the output is low, what is the operating region of the transistor? c. Does this arrangement to work for controlling the LED? Explain.
Solution
0 0

Three equal positive charges q are at the corners of an equilateral triangle of side a as shown in the figure below. Assume the three charges together create an electric field. (a) Sketch the field lines in the plane of the charges. Choose File No file chosen This answer has not been graded yet. (b) Find the location of one point (other than ∞ ) where the electric field is zero. at P at the center of the triangle at each vertex at the center of the base (c) What is the magnitude of the electric field at P due to the two charges at the base? (Use any variable or symbol stated above along with the following as necessary: ke.) E = (d) What is the direction of the electric field at P due to the two charges at the base? to the left to the right upward downward Three equal positive charges q are at the corners of an equilateral triangle of side a as shown in the figure below. Assume the three charges together create an electric field. (a) Sketch the field lines in the plane of the charges. Choose File No file chosen This answer has not been graded yet. (b) Find the location of one point (other than ∞ ) where the electric field is zero. at P at the center of the triangle at each vertex at the center of the base (c) What is the magnitude of the electric field at P due to the two charges at the base? (Use any variable or symbol stated above along with the following as necessary: ke.) E = (d) What is the direction of the electric field at P due to the two charges at the base? to the left to the right upward downward

Solution
0 0