Question

Notify Me Bookmark

A cube of wood having an edge dimension of 19.9 cm and a density of 649 kg/m3 floats on water. (a) What is the distance from the horizontal top surface of the cube to the water level? cm (b) What mass of lead should be placed on the cube so that the top of the cube will be just level with the water surface? kg

A cube of wood having an edge dimension of 19.9 cm and a density of 649 kg/m3 floats on water. (a) What is the distance from the horizontal top surface of the cube to the water level? cm (b) What mass of lead should be placed on the cube so that the top of the cube will be just level with the water surface? kg

Image text
A cube of wood having an edge dimension of 19.9 c m and a density of 649 k g / m 3 floats on water. (a) What is the distance from the horizontal top surface of the cube to the water level? ◻ c m (b) What mass of lead should be placed on the cube so that the top of the cube will be just level with the water surface? ◻ k g

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Three blocks with masses, m1 = 1 kg, m2 = 2 kg, and m3 = 4.0 kg, are pulled to the right across a horizontal frictionless surface by a constant force, F = 48 N, that acts on the large block as shown in the figure. Two of the blocks, m1 and m3, are connected by an ideal rope while the smallest block, m2, is sitting directly in front of m1 as shown. Take right as the positive direction. Version One. (a) Find the acceleration of the system? m/s2 (b) Determine the magnitude of the tension in the rope between m1 and m3. N (c) What is the magnitude of the normal (contact) force between m1 and m2 ? N Version Two. What if block m2 was placed on top of block m1 instead of in front of it? (a) What would be the acceleration of the system and tension in the rope if m2 and m1 stuck together? a = m/s2 T = N (b) What if the blocks were made of ice so that m2 and m1 didn't stick together? At what rate would each block accelerate? a1 = m/s2 a2 = m/s2 a3 = m/s2 a3 = What would be the tension in the rope?
Solution
0 0

A spring with a spring constant of 500 N/m is used to propel a 0.44−kg mass up an inclined plane. The spring is compressed 30 cm from its equilibrium position and launches the mass from rest across a horizontal surface and onto the plane. The plane has a length l = 2 m and is inclined at 32∘. Both the plane and the horizontal surface have a coefficient of kinetic friction with the mass of 0.35 . When the spring is compressed, the mass is at distance d = 1.4 m from the bottom of the plane. (a) What is the speed of the mass as it reaches the bottom of the plane? (b) What is the speed of the mass as it reaches the top of the plane? (c) What is the total work done by friction from the beginning to the end of the mass's motion?
Solution
0 0

Consider the trough shown below. The ends of the trough are trapezoids with dimensions a = 1.4 m, b = 0.6 m and H = 0.9 m. The length of the trough is L = 3.5 m. The trough is filled with water to a depth of 0.5 m. For the following, round your answers to at least 3 significant figures and include the units. You may assume that the mass density of water is 1000 kg/m3 and the acceleration due to gravity is 9.81 m/s2 a. Find the volume of water in the trough. Volume of water = b. Find the hydrostatic force acting on each of the following sides of the trough. Force on the horizontal bottom surface = Force on the long vertical side = Force on each trapezoidal end = c. Find the height of the centre of pressure on the long vertical side of the trough. The centre of pressure is above the bottom of the trough. d. Find the centre of pressure on each trapezoidal end. The centre of pressure on each trapezoidal end is from the vertical side and above the bottom of the trough. Feel free to use a calculator or a computer to evaluate the integrals.

 
Solution
0 0