Question

Notify Me Bookmark

A heart defibrillator passes 11.9 A through a patient's torso for 5.00 ms in an attempt to restore normal beating. (a) How much charge passed? (b) What voltage was applied if 473 J of energy was dissipated? kV (c) What was the path's resistance? kΩ (d) Find the temperature increase caused in the 8.00 kg of affected tissue. The specific heat of tissue is 3500 J/(kg⋅∘C). ∘C

A heart defibrillator passes 11.9 A through a patient's torso for 5.00 ms in an attempt to restore normal beating. (a) How much charge passed? (b) What voltage was applied if 473 J of energy was dissipated? kV (c) What was the path's resistance? kΩ (d) Find the temperature increase caused in the 8.00 kg of affected tissue. The specific heat of tissue is 3500 J/(kg⋅∘C). ∘C

Image text
A heart defibrillator passes 11.9 A through a patient's torso for 5.00 ms in an attempt to restore normal beating. (a) How much charge passed? ◻ (b) What voltage was applied if 473 J of energy was dissipated? ◻ kV (c) What was the path's resistance? ◻ k Ω (d) Find the temperature increase caused in the 8.00 kg of affected tissue. The specific heat of tissue is 3500 J / ( k g ⋅ ∘ C ) . ◻ ∘ C

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Consider the circuit shown in the figure below. The ideal battery provides an emf ε = 7.00 V, and the initially uncharged capacitor has capacitance C = 8.53 μF. The resistors are R1 = 2R, R2 = 4R, and R3 = 7R where R = 15 Ω. The switch is closed at t = 0. (a) How much current passes through the capacitor at t = 0? mA (b) How much current passes through the capacitor at t = ∞? mA (c) How much charge is eventually stored on the capacitor at t = ∞? μC (d) How long does it take for the charge on capacitor to increase to 80% of its eventual charge? μs (e) Suppose that the initially uncharged capacitor was filled with a dielectric with dielectric constant κ before the switch was closed at t = 0. In this case, your answer to part (d) would decrease remain the same increase
Solution
0 0

A parallel-plate capacitor with area 0.280 m2 and plate separation of 4.80 mm is connected to a 4.00−V battery. (a) What is the capacitance? F (b) How much charge is stored on the plates? C (c) What is the electric field between the plates? N/C (d) Find the magnitude of the charge density on each plate. C/m2 (e) Without disconnecting the battery, the plates are moved farther apart: Qualitatively, what happens to each of the previous answers?
Solution
0 0

Block A in the figure below has a mass mA = 5.00 kg, and block B has a mass mB = 8.00 kg. The blocks are forced together, compressing a spring S between them; then the system is released from rest on a level, frictionless surface. The spring, which has negligible mass, is not fastened to either block and drops to the surface after it has expanded. Block B acquires a speed of 1.20 m/s (a) What is the final speed of block A? m/s (b) How much potential energy was stored in the compressed spring? J
Solution
0 0