Question

Notify Me Bookmark

A hollow ball m = 20.0 g and radius r = 1.00 cm is placed on a ramp at height H. Assuming that it rolls without slipping and referring to the image below. If R = 10.0 cm and H = 59.0 cm, does the ball stay in contact with the top of the loop? Please show your work

A hollow ball m = 20.0 g and radius r = 1.00 cm is placed on a ramp at height H. Assuming that it rolls without slipping and referring to the image below. If R = 10.0 cm and H = 59.0 cm, does the ball stay in contact with the top of the loop? Please show your work

Image text
  1. (10 Points) A hollow ball m = 20.0 g and radius r = 1.00 c m is placed on a ramp at height H . Assuming that it rolls without slipping and referring to the image below. If R = 10.0 c m and H = 59.0 c m , does the ball stay in contact with the top of the loop? Please show your work

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

As a torque activity, your Physics TA sets up the arrangement shown below. A uniform rod of mass mr = 173 g and length L = 100.0 cm is attached to the wall with a pin as shown. Cords are attached to the rod at the r1 = 10.0 cm and r2 = 90.0 cm mark, passed over pulleys, and masses of m1 = 266 g and m2 = 167 g are attached. Your TA asks you to determine the following. (a) The position r3 on the rod where you would suspend a mass m3 = 200 g in order to balance the rod and keep it horizontal if released from a horizontal position. In addition, for this case, what force (magnitude and direction) does the pin exert on the rod? Use standard angle notation to determine the direction of the force the pin exerts on the rod. Express the direction of the force the pin exerts on the rod as the angle θF, measured with respect to the positive x-axis (counterclockwise is positive and clockwise is negative). r3 = m Fp = N θF = (b) Let's now remove the mass m3 and determine the new mass m4 you would need to suspend from the rod at the position r4 = 20.0 cm in order to balance the rod and keep it horizontal if released from a horizontal position. In addition, for this case, what force (magnitude and direction) does the pin exert on the rod? Express the direction of the force the pin exerts on the rod as the angle θF, measured with respect to the positive x-axis (counterclockwise is positive and clockwise is negative). m4 = kg Fp = N θF = (c) Let's now remove the mass m4 and determine the mass m5 you would suspend from the rod in order to have a situation such that the pin does not exert a force on the rod and the location r5 from which you would suspend this mass in order to balance the rod and keep it horizontal if released from a horizontal position. m5 = kg r5 = m
Solution
0 0

A hoop of mass M = 4 kg and radius R = 0.4 m rolls without slipping down a hill, as shown in the figure. The lack of slipping means that when the center of mass of the hoop has speed v, the tangential speed of the hoop relative to the center of mass is also equal to vCM, since in that case the instantaneous speed is zero for the part of the hoop that is in contact with the ground (v − v = 0). Therefore, the angular speed of the rotating hoop is ω = vCM/R. (a) The initial speed of the hoop is vi = 2 m/s, and the hill has a height h = 4.0 m. What is the speed vf at the bottom of the hill? vf = m/s (b) Replace the hoop with a bicycle wheel whose rim has mass M = 4 kg and radius R = 0.4 m, and whose hub has mass m = 1.8 kg, as shown in the figure. The spokes have negligible mass. What would the bicycle wheel's speed be at the bottom of the hill? (Assume that the wheel has the same initial speed and start at the same height as the hoop in part (a)). vf = m/s
Solution
0 0

You are working during the summer at a company that builds theme parks. The company is designing an electromagnetic propulsion system for a new roller coaster. A model of a substructure of the device appears in the figure below. (i) The rod is of length d = 1.00 m and mass m = 0.600 kg. The rod carries a current I = 100 A in the direction shown and rolls along the rails of length L = 20.0 m without slipping. The entire system of rod and rails is immersed in a uniform downward-directed magnetic field with magnitude B = 2.30 T. The electromagnetic force on the rod is parallel to the rails, causing the rod to roll to the right in the figure. When a full-scale device is produced, this rod will represent the axle of wheels on which the car and its passengers ride. The electromagnetic force on the axle will provide the motion of the car at the beginning of the roller-coaster ride. Your supervisor wants to test the substructure in the figure in a flat outdoor area on the grounds of the company. By projecting the rod from the rails in a horizontal direction from a height h = 2.20 m, the projection speed can be determined from how far from the ends of the rails the rod hits the ground. Your supervisor asks you to determine the length of the outdoor area needed to test the device. (Determine the total horizontal distance, in m, from the initial position of the rod on the tracks to the final position of the rod where it lands on the ground.) m

Solution
0 0