Question

Notify Me Bookmark

A pendulum's angular position is given by θ = 0.0310 cos⁡(ωt), where θ is in radians and ω = 6.43 rad/s. Find the period (in s) and length (in m) of the pendulum. period s length m

A pendulum's angular position is given by θ = 0.0310 cos⁡(ωt), where θ is in radians and ω = 6.43 rad/s. Find the period (in s) and length (in m) of the pendulum. period s length m

Image text
A pendulum's angular position is given by θ = 0.0310 cos ⁡ ( ω t ) , where θ is in radians and ω = 6.43 r a d / s . Find the period (in s) and length (in m ) of the pendulum. period ◻ s length ◻ m

Detailed Answer

3 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (3)
  • Correct answers (3)
  • Complete solution (3)
  • Step-by-step solution (3)
  • Fully explained (3)

Similar/Related Questions

The angular position of a point on the rim of a rotating wheel is given by θ = 4.0t - 3.0t2 + t3, where θ is in radians and t is in seconds. What are the angular velocities at (a) t = 2.0 s and (b) t = 4.0 s? (c) What is the average angular acceleration for the time interval that begins at t = 2.0 s and ends at t = 4.0 s? What are the instantaneous angular accelerations at (d) the beginning and (e) the end of this time interval?
Solution
0 0

A crane is made from a long, horizontal arm with mass m = 2.41×104 kg and length L = 52.0 m. The crane arm is supported by a vertical tower positioned halfway along the arm as shown in the figure below. The arm is free to rotate horizontally about the axis of the tower. The moment of inertia of a uniform rod with mass m and length L pivoted about its centre is given by Irod = 112 mL2. L Part 1) The crane lifts a mass M = 1070 kg at the end of the arm on one side of the tower. To keep the crane balanced, a counterweight of mass Mc = 5420 kg is placed on the arm on the opposite side of the tower to mass M. How far from the tower should the counterweight be placed such that the centre of mass for the arm and both masses is directly over the tower? x = m Part 2) What is the moment of inertia of the crane about the axis of the tower? Include the contributions of the horizontal arm, the mass and the counterweight. I = kg m2 Part 3) A net torque of magnitude τ = 6660 Nm is applied to the crane. If the crane starts at rest, what is its angular velocity after t = 30.0 s ? ω = rad s−1
Solution
0 0

Consider the circuit shown below of a common source amplifier with a current mirror bias. Find the following: a. Find kp and kn. b. Find the drain current of M2 given that Ibias = 2mA and Vout = 2.5V. C. Find the gm and ro, of transistor M1. d. Sketch the small signal model of transistor M3 (Hint: Is there any small signal in any terminal of M3? If yes, then where is it? If no, then what happens to the small signal model?). It is given that the NMOS (M1) parameters are uoCox = 3 mA/V2, VTH,n = 0.5V and lambda = 0.02 and the PMOS (M2 and M3) parameters are uoCox = 1 mA/V2 and VTH,p = -0.6V . The PMOS transistor M3 does not have channel length modulation while PMOS transistor M2 has lambda = 0.02. It is also given that the dimensions of M2 and M3 have equal widths of 5 um and lengths of L2 = 3um and L3 = 1.5um, respectively. M1 has length of L1 = 1um and width of W1 = 2um.

Solution
0 0