Question

Notify Me Bookmark

A uniform plank rests on a level surface as shown below. The plank has a mass of 30 kg and is 6.0 m long. How much mass can be placed at its right end before it tips? (Hint: When the board is about to tip over, it makes contact with the surface only along the edge that becomes a momentary axis of rotation.) 10 kg 20 kg 40 kg 30 kg

A uniform plank rests on a level surface as shown below. The plank has a mass of 30 kg and is 6.0 m long. How much mass can be placed at its right end before it tips? (Hint: When the board is about to tip over, it makes contact with the surface only along the edge that becomes a momentary axis of rotation.) 10 kg 20 kg 40 kg 30 kg

Image text
A uniform plank rests on a level surface as shown below. The plank has a mass of 30 k g and is 6.0 m long. How much mass can be placed at its right end before it tips? (Hint: When the board is about to tip over, it makes contact with the surface only along the edge that becomes a momentary axis of rotation.) 10 k g 20 k g 40 k g 30 k g

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

A crane is made from a long, horizontal arm with mass m = 2.41×104 kg and length L = 52.0 m. The crane arm is supported by a vertical tower positioned halfway along the arm as shown in the figure below. The arm is free to rotate horizontally about the axis of the tower. The moment of inertia of a uniform rod with mass m and length L pivoted about its centre is given by Irod = 112 mL2. L Part 1) The crane lifts a mass M = 1070 kg at the end of the arm on one side of the tower. To keep the crane balanced, a counterweight of mass Mc = 5420 kg is placed on the arm on the opposite side of the tower to mass M. How far from the tower should the counterweight be placed such that the centre of mass for the arm and both masses is directly over the tower? x = m Part 2) What is the moment of inertia of the crane about the axis of the tower? Include the contributions of the horizontal arm, the mass and the counterweight. I = kg m2 Part 3) A net torque of magnitude τ = 6660 Nm is applied to the crane. If the crane starts at rest, what is its angular velocity after t = 30.0 s ? ω = rad s−1
Solution
0 0

The uniform seesaw shown below is balanced on a fulcrum located 3.0 m from the left end. The smaller boy on the right has a mass of 40 kg and the bigger boy on the left has a mass 80 kg. What is the mass of the board? 40 kg 10 kg 80 kg 30 kg
Solution
0 0

A block of mass 500 g is attached to a spring of spring constant 80 N/m as shown below. The other end of the spring is attached to a support while the mass rests on a rough surface with a coefficient of friction of 0.20 that is inclined at angle of 30∘. The block is pushed along the surface till the spring compresses by 10 cm and is then released from rest. (a) How much potential energy was stored in the block-spring-support system when the block was just released? (b) Determine the speed of the block when it crosses the point when the spring is neither compressed nor stretched. (c) Determine the position of the block where it just comes to rest on its way up the incline. (15 points)
Solution
0 0