Question

Notify Me Bookmark

An elevator has mass 600 kg, not including passengers. The elevator is designed to ascend, at constant speed, a vertical distance of 20.0 m (five floors) in 16.0 s, and it is driven by a motor that can provide up to 40 hp to the elevator. Part A What is the maximum number of passengers that can ride in the elevator? Assume that an average passenger has mass 65.0 kg. n =

An elevator has mass 600 kg, not including passengers. The elevator is designed to ascend, at constant speed, a vertical distance of 20.0 m (five floors) in 16.0 s, and it is driven by a motor that can provide up to 40 hp to the elevator. Part A What is the maximum number of passengers that can ride in the elevator? Assume that an average passenger has mass 65.0 kg. n =

Image text
An elevator has mass 600 k g , not including passengers. The elevator is designed to ascend, at constant speed, a vertical distance of 20.0 m (five floors) in 16.0 s , and it is driven by a motor that can provide up to 40 h p to the elevator. Part A What is the maximum number of passengers that can ride in the elevator? Assume that an average passenger has mass 65.0 k g . ◻

Detailed Answer

3 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up
  • Student Reviews:
  • (3)
  • Correct answers (3)
  • Complete solution (3)
  • Step-by-step solution (3)
  • Fully explained (3)

Similar/Related Questions

Given the following circuit, assuming that all inputs of the circuit shown in Figure 1 below are initially 0 during the precharge phase and that all internal nodes are at 0V: a. Calculate the voltage drop on V0, if A changes to 1 (VDD = 2.5 V) during the evaluate phase. It is given that Vtn = 0.5 V, 2φF = 0.6 V and γ = 0.4 V0.5 . Hint: Don’t forget the body effect. b. Now calculate the voltage drop on Vo if both A and B change to 1 (under the above conditions). c. What is the maximum number of transistors that can be connected in series to M1 and M2 (including M1 and M2, excluding M0 ) if the output should not fall below 0.9 V during the evaluate phase? Assume that each one of the new transistors has the same intrinsic capacitance (to ground) as M1 and M2 (C=10fF).
Solution
1 0

Consider the domino circuit in Fig.3. Assuming that all inputs of the circuit shown in Fig.3 are initially Low (0V) during the pre-charge phase and that all internal nodes are at 0V. Ignore all other parasitic capacitance except C1, C2, and C3. It is given that VDD=2.5V, Vtn0=0.5V, 2phif=0.6V and gamma=0.4V^0.5. (25pts) (a) Calculate the voltage drop on Vout (OUT node voltage) if A changes to High (2.5V) during the evaluation phase. (10pts) (Hint: Don't forget the body effect.) (b) Calculate the voltage drop on Vout (OUT node voltage) if both A and B change to High (VDD=2.5V) (5pts). (c) What is the maximum number of transistors that can be connected in series to M1 and M2 (including M1 and M2, excluding M3) if the output should not fall below 0.9V during the evaluation phase? Assume that each one of the new transistors has the same intrinsic capacitance (to ground) as M1 and M2 (C=5fF). (10pts)
Solution
1 0

A small glider is placed against a compressed spring at the bottom of an air track that slopes upward at an angle of 48.0∘ above the horizontal. The glider has mass 9.00×10−2 kg. The spring has 680 N/m and negligible mass. When the spring is released, the glider travels a maximum distance of 1.50 m along the air track before sliding back down. Before reaching this maximum distance, the glider loses contact with the spring. Part A What distance was the spring originally compressed? Express your answer in meters. Part B When the glider has traveled along the air track 0.500 m from its initial position against the compressed spring, is it still in contact with the spring? Yes No Submit Request Answer Part C What is the kinetic energy of the glider at this point? Express your answer in joules. K = JA small glider is placed against a compressed spring at the bottom of an air track that slopes upward at an angle of 48.0∘ above the horizontal. The glider has mass 9.00×10−2 kg. The spring has 680 N/m and negligible mass. When the spring is released, the glider travels a maximum distance of 1.50 m along the air track before sliding back down. Before reaching this maximum distance, the glider loses contact with the spring. Part A What distance was the spring originally compressed? Express your answer in meters. Part B When the glider has traveled along the air track 0.500 m from its initial position against the compressed spring, is it still in contact with the spring? Yes No Submit Request Answer Part C What is the kinetic energy of the glider at this point? Express your answer in joules. K = J
Solution
3 0